Panasonic DP-1810F manual Installation, FCC Warning For U.S.A

Page 9

Precautions

Installation

■The copier should not be installed in areas with the following conditions:

CExtremely high or low temperature and humidity.

Ambient conditions

Temperature: 50 – 86°F (10° – 30°C)

Relative humidity: 30 – 80%

CWhere temperature and humidity can change rapidly, causing condensation.

CDirect exposure to sunlight.

CDirectly in the air conditioning flow.

CIn areas of high dust concentration.

CIn areas of poor ventilation.

CIn areas with chemical fume concentration.

CIn areas with extreme vibration.

CWith unstable or uneven conditions (floors, etc.).

■The maximum power consumption is 1.2 kW.

A properly wired (grounded), dedicated, 15A, 120V AC outlet is required. Do not use an extension cord.

The power cord on this equipment must be used to disconnect the main power.

Please ensure that the socket outlet is installed near the equipment and is easily accessible.

FCC WARNING For U.S.A.

FCC WARNING:

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his/her own expense.

The user could lose the authority to operate this equipment if any unauthorized changes or modifications are made to this equipment.

CAUTION

CTHIS PRODUCT CONTAINS A LITHIUM BATTERY. DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED.

REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE.

DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS OF YOUR LOCAL SOLID WASTE OFFICIALS.

Before sStarting

9

Image 9

Contents Before Starting OptionsEnglish Others Model and Serial Number Important InformationCommon Features and Usage Operation ChartEnergy Star Table of Contents Problem Solving OptionsOthers For Your Safety PrecautionsLaser Safety Manufacturer’s name and address Factory IDToner and Paper Ventilation HandlingFCC Warning For U.S.A InstallationControl Panel Alarm LED Red Contents Refer to Interrupt Key, Memory in Key, M1/M2 KeysCopy Size Key Original Size KeyFull Size Copying Basic CopyCopying the Same Size Originals $Select Exposure ControlCopying with Preset Ratios Reduction or Enlargement CopyingPaper Tray key # Automatic Original Feeding Automatic Document Feeder$2 in 1 Copy ADF Tray Original GuidesInappropriate Originals Face-UpZoom Copying ZoomSelect Original Using the Sheet Bypass $Adjust the side guidesCopying on Special Paper, etc Procedure Creative Features1 Copy 1 keyCopy Or Margin key Press BOOK, EdgeTo Store a Job in Memory Job MemoryTo Recall a Job Stored in Memory $Press the Memory in F2 keySort Copy Sort ModeSort Copy From Platen Glass onlyEnergy Saver/Interrupt Mode Other FeaturesEnergy Saver Mode Sleep ModeDigital Skyshot Mode Skyshot ModeNone NormalPlaten Upper Left Corner Manual Skyshot ModeOther Remarks Next Combined Function TableFunctions Job Memory Retrieval Selections Original CopyFunction Using Function Modes to Change the Initial Copy ModesGeneral Functions Modes Function Initial SettingModes Function Copier SettingsGeneral Functions for Key Operator Copier Settings for Key Operator Function Setting Changing the Auto Exposure SettingProceed as Follows Function Setting for Key Operator Changing the Paper SizeFunctions Paper IndicatorStopper Guide a Paper Guide b SizeDepartment Counter DEPT. Counter ModeSelect the Department Counter Mode Components AccessoriesProblem Solving Adding Paper JSheet Paper Tray Cap Adding the Toner and Replacing Toner Waste Container ?Problem Solving Paper Misfeed Locations Removing a Misfed PaperPaper Exit Area Hot Paper Entry/Transport AreaHeated SurfacePaper Feed Module ADF Before Calling Service TroubleshootingCheck Action Unit Does Not OperateAdd Toner Warning Indicator Light CopiesMarked Copies User Error Codes U Code Replacing the Battery Battery Replacement Required MessageBattery Replacement Procedure DP-1810F Copier Specifications3rd Paper Feed Module DA-DS183 2nd/4th Paper Feed Module DA-DS182For Printer Options and SuppliesFor Fax For Network Printing / Email Internet FaxMemo Warranty

Related manuals

Manual 155 pages 18.62 Kb