Snell Acoustics 650r, 680r owner manual Installation

Page 6

INSTALLATION

Note: The speakers should be mounted on a flat surface to form a good seal between the speaker flange and the mounting surface.

1.Make a 758-inch (194mm) cutout using the supplied template. It is not necessary to remove fiberglass insulation that may be behind the wall.

2.Run wire from amplifier to cutout. Allow an extra foot of wire at the cutout.

3.Remove the speaker grille. Carefully pry up one side with an awl or small screwdriver.

Wall or Ceiling Material

The AMC650r and AMC680r have heavy-duty spring-loaded push terminals for their input connections. The terminals will accept wire or pins up to 532-inch in diameter.

4. If connecting with bare wire, strip the wire so that approximately 12-inch is exposed. Twist the wire into a bundle so that there are no stray strands. Push the end of the terminal to expose the hole in the side of the terminal. Then insert bare wire into the hole and release.

5.The insulation of the wire will have a stripe or ribs on one side. Use this marking to ensure the + (red) terminal of the speaker is connected to the + terminal of the amplifier and the

– terminal of the speaker is connected to the – terminal of the amplifier.

Warning! To prevent electrical shock, always switch off the amplifier or receiver when making connections to the speaker system.

6. Place the speaker in the hole. Rotate the speaker until the tweeter waveguide is aimed in the desired direction. Use a Phillips screwdriver to tighten the four pivoting mounting arms. Avoid overtightening, as this could break the mounting arms or damage the ceiling surface.

7.Install the grille. Press firmly arund the outer edge of the grille to seat it firmly in place.

6

Image 6
Contents AMC AMC650r AMC680r SpecificationsWeight/each Lbs 1.4kg Lbs 2.0kg Finish White paintable With neodymiumProduct Description Where to Place Your Speaker SystemsEffects of the Installation Location This Package ContainsStereo Image Aiming the SpeakersCreating the illustion of sound coming from Take the following steps to prepare for installation Using As a Surround SpeakerPreparing for Installation Painting the SpeakersInstallation Limited Warranty Listening Levels and Power HandlingHOW to Care for Your Speakers If Service Seems Necessary

680r, 650r specifications

Snell Acoustics has long been recognized for its commitment to producing high-quality loudspeakers, and their models 680R and 650R showcase the brand's dedication to audio excellence. Both models are crafted with the audiophile in mind, featuring a range of technologies and characteristics that enhance sound performance and provide an immersive listening experience.

The Snell Acoustics 680R is a floor-standing speaker that delivers powerful and dynamic sound. One of its standout features is its advanced driver design. The 680R incorporates a custom-designed 8-inch woofer that ensures deep bass response, while a 5.25-inch midrange driver offers a rich and detailed midrange performance. At the top of the speaker, the high-frequency response is handled by a planar ribbon tweeter, known for its exceptional clarity and extended frequency range. This combination enables the 680R to reproduce music with remarkable precision and fidelity.

Another impressive characteristic of the 680R is its cabinet design. The speaker employs an acoustically inert enclosure that minimizes unwanted resonance, allowing for pure sound reproduction. Additionally, the cabinet features a stylish finish, adding an aesthetic appeal suitable for modern living spaces. The speaker is designed to be easily integrated into a variety of home audio systems, making it a versatile choice for both casual listeners and serious audiophiles.

On the other hand, the Snell Acoustics 650R is a bookshelf speaker that packs a punch in a more compact form factor. Like the 680R, it is equipped with high-quality drivers, including a 6.5-inch woofer and a 1-inch tweeter that work in harmony to deliver a balanced audio profile. The 650R excels in smaller listening environments, making it an ideal option for those with limited space but a passion for high-fidelity sound.

Both models utilize advanced crossover networks to ensure seamless integration between the drivers, resulting in a coherent soundstage. The crossover technology is meticulously engineered to minimize phase distortion, providing a clear and engaging sound image.

In conclusion, the Snell Acoustics 680R and 650R are exemplary loudspeakers that embody the brand's philosophy of delivering superior sound quality. With their innovative driver designs, high-quality materials, and precision engineering, these speakers are capable of bringing any musical performance to life, whether in a dedicated home theater or simply enjoying your favorite tunes in your living room.