Panasonic BL-PA300A operating instructions Connecting adaptors to network devices

Installation

Connecting adaptors to network devices

Once you have placed the adaptors where you plan to use them and are satisfied with the network speed test results for your terminals (see page 15), follow the procedure below to connect your adaptors to your network devices (broadband router, hub, computer, network printer, network camera, etc.). This will integrate your HD-PLCnetwork with your home network.

1.Confirm that each adaptor is plugged in correctly to the wall outlet.

•Do not plug adaptors in upside-down (i.e., with the LAN jack facing up).

2.Connect a LAN cable to each adaptor’s LAN jack.

•The LAN indicator of each adaptor turns green.

•If an adaptor’s LAN indicator does not turn green, see page 19.

3.Connect the other end of each LAN cable to a network device.

•Up to 16 adaptors can be connected to the same network. If a hub is used, up to 8 devices can be connected to each adaptor.

•Avoid connecting more than one adaptor to the same hub or router.

You are now ready to use your computers, network printers, network cameras, etc.

14