Useful Information
Testing a terminal’s network speed
Once you have connected the adaptors where you plan to use them, follow the procedure below to test the speed of each terminal’s network connection to the master. Make sure that the terminal has already been registered to a master (see page 11).
1.Press and hold the terminal’s SETUP button for about 1 second.
•The indicators light one at a time.
PLCLAN MASTER
2.After a few seconds, the network speed test result is displayed.
3.Refer to the chart below to determine the network speed.
PLC | LAN | MASTER | Result | Speed |
|
|
| No link | — |
|
|
| Good | Less than |
|
|
| 10 Mbps*1 | |
|
|
|
| |
|
|
| Better | 10 Mbps to |
|
|
| 30 Mbps*1 | |
|
|
|
| |
|
|
| Best | More than |
|
|
| 30 Mbps*1 | |
|
|
|
|
[For assistance, please call: | 15 |