REL Acoustics Stampede, Strata 5 user manual Rel

Page 13

REL Acoustics ST 5 User Manual

To connect to the amplifier/processor/receiver using the phono to phono LFE interconnect

Alternative method for connecting at Low Level from pre amplifier

In some circumstances it is not possible to use the high level method of connection, for example when using active speakers. Instead of using the attenuator as shown on page 15, connect as shown below using a “Y” adapter from the left and right pre amplifier outputs and a single phono to phono interconnect from the “Y” adapter to one of the low level inputs on the

REL.

Phono to Phono Interconnect.

To sub/LFE output of

Only use this method if the pre amplifier has two separate outputsAmplifier/Processor. Sub LFE

Inputthe unlikely event that the second pre amplifier output is only a parallel connection to the other then this method will cause a mono signal to be sent to the main amplifier(s) or active speakers.

Connect as shown above using a phono to phono interconnect. Plug one end into the sub/LFE output on the amplifier/processor and the other end into the LFE LEVEL input on the sub-bass system.

The output level can be adjusted by one of two methods.

1.By using the remote control: press the buttons marked LFE LEVEL ‘+’ or ‘-‘. The front control panel will show ‘Hi’ on the two left hand digits. The volume level can be adjusted up or down by pressing the ‘+’ or ‘-‘ buttons and the display will show 00 to 99 on the two right hand digits.

2.By using the encoder control on the front control panel: press the control knob to select ‘LF’ on the two left hand digits, rotate control knob to select the value in the range 00 to 99 on the two right hand digits.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Stampede Strata Contents Stampede and Strata WelcomeImportant Safeguards Main Features of the NEW ‘ST’ SeriesService After Warranty Worldwide WarrantyRear Amplifier Panel Remote ControlMemory Functions To Store User SettingsDisplay of Memory Function Factory Default SettingsControl Panel For operation see pages 7 Control Panel DisplayAdditional Functions Always switch off your system before disconnecting any wires Connecting UPYellow Mono Black Block SPK OUT PRE Amplifier REL REL SET-UP Made Simple ConnectingTwo Things Before You Begin PositioningPage Page Overload Protection RunningCare and Polishing Power Saving Efficiency Specifications

Stampede, Strata 5 specifications

The REL Acoustics Stampede and Strata 5 are two remarkable subwoofers that represent the pinnacle of modern sound engineering. Designed for audiophiles and home theater enthusiasts, these models deliver deep, rich bass that transforms the listening experience.

The REL Stampede subwoofer stands out with its powerful 12-inch active driver and a pair of 12-inch passive radiators. This unique design allows the Stampede to produce deep bass frequencies effortlessly, reaching down to 20 Hz. Its robust cabinet construction minimizes unwanted resonance, ensuring clean and precise sound reproduction. Additionally, the Stampede boasts an advanced 500-watt Class D amplifier, providing the necessary power to drive the speakers with authority and clarity.

One of the key features of the Stampede is its ability to connect wirelessly using REL’s innovative LongBow wireless system. This technology eliminates the need for long, unsightly cables and allows for flexible placement within the room, ultimately enhancing both aesthetics and sound quality. The LongBow system uses advanced transmission protocols, ensuring a stable connection with minimal latency, making it ideal for movie viewing and music listening.

On the other hand, the Strata 5 subwoofer incorporates REL's signature high-level input option, which allows for a seamless integration with a wide range of audio systems. This feature ensures that the subwoofer can work effectively with both stereo and home theater setups, providing versatility for various listening environments.

Both models also include advanced controls for tuning the subwoofer to match the specific acoustics of the listener's room. These features allow for adjustments in gain, low-pass filter, and phase settings, enabling users to achieve the perfect blend with their main speakers. The easy-to-use control panel on the rear of each subwoofer makes these adjustments simple and intuitive.

In terms of build quality, both the Stampede and Strata 5 feature elegant designs with premium finishes, ensuring they look as good as they sound. They are engineered to last, with durable materials that can withstand the rigors of extended use.

In summary, the REL Acoustics Stampede and Strata 5 subwoofers combine advanced technology, solid construction, and user-friendly features to deliver a superior listening experience that satisfies the most discerning audio lovers. Whether for music or movies, these subwoofers provide powerful, immersive bass that enhances any sound system.
Top Page Image Contents