REL Acoustics Stampede, Strata 5 manual

REL Acoustics ST 5 User Manual

Trying to ignore all other music in the cut, listen for the bass drum and its effect on the listening room.

1.Phase Orientation: Once in the corner we need to adjust for phase. This may be the single most critical step, and because it really is quite simple, it is often over looked by even the most experienced audiophiles. The right phase is whichever position is the loudest or fullest. While playing music with true low bass, adjust the crossover to a point where the sub and the speaker are sure to share frequencies (40Hz for big speakers or 60Hz for smaller speakers). At this point turn the gain so that both sub and speaker are roughly equal in volume and then, using the “Phase” button on the remote control, change from 0 to 180 degrees (this shows as 0 and 18 in the display). Select the option that sounds loudest or fullest from the listening position. At this setting, the sub-bass system is working in harmony with your main speakers, reinforcing bass, and not cancelling it. Don’t be surprised if the chosen position shows as 180 degrees “out” of phase. Within your room/system it is IN phase.

Alternatively the phase can be changed using the control knob on the front of the cabinet. Although perfectly feasible, the remote is the preferred method as the assessment can be done from the usual listening position and is the more accurate way of achieving the best result.

2.Room Orientation: Next, if space allows, try two different orientations of the woofer relative to the wall. First, while playing the set-up cut, place the REL with the connection panel parallel with the rear wall. Second, place the REL with the connection panel parallel with the sidewall. As with phase, the orientation which yields the most output is the best position for that room. This process simply positions the driver to most efficiently drive the room. In some instances there may be little difference, at which point aesthetic concerns may override performance concerns.

3.Placement: The next step is to determine precisely how far out from the corner of the room the sub should be placed to achieve the most efficient output, as well as the lowest frequency extension. With the sub fully into the corner and continuing to play the music, slowly pull the sub from the corner on the diagonal, equidistant from both side and rear walls. Do this a couple of centimetres (an inch) at a time. At a certain point (sometimes a matter of only a few centimetres, in rare cases up to 25 centimetres or more) the sub will audibly go lower, play louder, and if it truly locks on to the room and is fully pressurising it, the air around the sub will seem to be energised, stop right there! This is the correct position for the sub.

Crossover and gain settings

The last stage of the set up is crossover and gain. You will require an acoustically recorded track preferably with bass instruments and vocal. What we are looking for here is a seamless crossover and integration between your main speakers and the sub-bass system. Firstly you will need to set a rough volume level. To do this leave the crossover where it is and simply play the system varying the volume until you have a happy medium between the speakers and sub, the sub will sound obvious still but this is just the start.

Next reduce the frequency to minimum (16Hz). Using the same track, gently increase the frequency 1 Hz at a time. What you are listening for is the point where the sub begins to sound obvious within the system (usually somewhere between 20Hz and 33Hz with most loudspeakers). Once you find the point where you can hear the sub over the response of the speakers reduce the setting by 1 to 3 Hz This is not an exact science, but what we want is the sub to be invisible within the system sonically. In short we increase the REL until you can hear it and then reduce until you cannot.

Finally adjust the volume to taste. This generally will be by 1 or 2 positions. And that’s it. All that’s left is to open a good bottle of wine, relax and enjoy.

Stampede, Strata 5 specifications

The REL Acoustics Stampede and Strata 5 are two remarkable subwoofers that represent the pinnacle of modern sound engineering. Designed for audiophiles and home theater enthusiasts, these models deliver deep, rich bass that transforms the listening experience.

The REL Stampede subwoofer stands out with its powerful 12-inch active driver and a pair of 12-inch passive radiators. This unique design allows the Stampede to produce deep bass frequencies effortlessly, reaching down to 20 Hz. Its robust cabinet construction minimizes unwanted resonance, ensuring clean and precise sound reproduction. Additionally, the Stampede boasts an advanced 500-watt Class D amplifier, providing the necessary power to drive the speakers with authority and clarity.

One of the key features of the Stampede is its ability to connect wirelessly using REL’s innovative LongBow wireless system. This technology eliminates the need for long, unsightly cables and allows for flexible placement within the room, ultimately enhancing both aesthetics and sound quality. The LongBow system uses advanced transmission protocols, ensuring a stable connection with minimal latency, making it ideal for movie viewing and music listening.

On the other hand, the Strata 5 subwoofer incorporates REL's signature high-level input option, which allows for a seamless integration with a wide range of audio systems. This feature ensures that the subwoofer can work effectively with both stereo and home theater setups, providing versatility for various listening environments.

Both models also include advanced controls for tuning the subwoofer to match the specific acoustics of the listener's room. These features allow for adjustments in gain, low-pass filter, and phase settings, enabling users to achieve the perfect blend with their main speakers. The easy-to-use control panel on the rear of each subwoofer makes these adjustments simple and intuitive.

In terms of build quality, both the Stampede and Strata 5 feature elegant designs with premium finishes, ensuring they look as good as they sound. They are engineered to last, with durable materials that can withstand the rigors of extended use.

In summary, the REL Acoustics Stampede and Strata 5 subwoofers combine advanced technology, solid construction, and user-friendly features to deliver a superior listening experience that satisfies the most discerning audio lovers. Whether for music or movies, these subwoofers provide powerful, immersive bass that enhances any sound system.