Memory Functions, To Store User Settings

REL Acoustics ST 5 User Manual

Most functions are accessible via either the remote or the front panel. Standby and the memory are only accessible via the remote. Display timeout, display brightness and DC trigger are only accessible via the front panel.

To prevent accidental changing of parameters once they have been set, the manual encoder on the front panel can be electronically locked. To lock the control first press F2 and then F1 in sequence, the display will read FP 0F (front panel off), to reactivate the front panel encoder press F2 and F1 in sequence again, the display will read FP on (front panel on).

Used to raise or lower the volume when using the LFE input. Range 00 to 99 as displayed on the digital readout on main control panel.

Used to raise or lower the volume when using the high level input. Range 00 to 99 as displayed on the digital readout on main control panel.

Used to set the upper roll off point in the range 16 to 99 Hz as displayed on the digital readout on the main control panel.

LFE MUTE MEMORY

Single channel graphic equaliser, - 9dB to + 9dB at 80Hz.Display will read –9 ….0….9

Used to store user preset preferences. See below for detailed instructions on how to store and recall settings.

Used to mute the LFE input. Display will read LF on or LF oF. Press again to switch LFE input back on

Used to put the sub bass system into standby mode. Display shows Stby, press again to bring out of standby.

Used to change the phase from 0 to 180

Degrees. NOTE: The display will read

0 and 18.

Memory Functions

There are four memory locations for the user to store preferred settings, these are:

Position 1 Using the MEMORY button in conjunction with the LFE + and – buttons

Position 2 Using the MEMORY button in conjunction with the HIGH LEVEL + and – buttons Position 3 Using the MEMORY button in conjunction with the FREQUENCY + and – buttons Position 4 Using the MEMORY button in conjunction with the SLAM/DEPTH + and – buttons

To Store User Settings

First select the settings for each function which satisfy your particular requirements, for example you may wish to store the settings for two channel use and another set for 5.1 home cinema use. When the correct settings are chosen then press the MEMORY button, and one of the four memory location + buttons, the settings are now stored in this memory position. To recall these settings press the memory button and the relevant memory location – button in sequence. The above procedure can be repeated for the other memory locations

All settings can be stored in memory, including those accessible only via the front panel.

Stampede, Strata 5 specifications

The REL Acoustics Stampede and Strata 5 are two remarkable subwoofers that represent the pinnacle of modern sound engineering. Designed for audiophiles and home theater enthusiasts, these models deliver deep, rich bass that transforms the listening experience.

The REL Stampede subwoofer stands out with its powerful 12-inch active driver and a pair of 12-inch passive radiators. This unique design allows the Stampede to produce deep bass frequencies effortlessly, reaching down to 20 Hz. Its robust cabinet construction minimizes unwanted resonance, ensuring clean and precise sound reproduction. Additionally, the Stampede boasts an advanced 500-watt Class D amplifier, providing the necessary power to drive the speakers with authority and clarity.

One of the key features of the Stampede is its ability to connect wirelessly using REL’s innovative LongBow wireless system. This technology eliminates the need for long, unsightly cables and allows for flexible placement within the room, ultimately enhancing both aesthetics and sound quality. The LongBow system uses advanced transmission protocols, ensuring a stable connection with minimal latency, making it ideal for movie viewing and music listening.

On the other hand, the Strata 5 subwoofer incorporates REL's signature high-level input option, which allows for a seamless integration with a wide range of audio systems. This feature ensures that the subwoofer can work effectively with both stereo and home theater setups, providing versatility for various listening environments.

Both models also include advanced controls for tuning the subwoofer to match the specific acoustics of the listener's room. These features allow for adjustments in gain, low-pass filter, and phase settings, enabling users to achieve the perfect blend with their main speakers. The easy-to-use control panel on the rear of each subwoofer makes these adjustments simple and intuitive.

In terms of build quality, both the Stampede and Strata 5 feature elegant designs with premium finishes, ensuring they look as good as they sound. They are engineered to last, with durable materials that can withstand the rigors of extended use.

In summary, the REL Acoustics Stampede and Strata 5 subwoofers combine advanced technology, solid construction, and user-friendly features to deliver a superior listening experience that satisfies the most discerning audio lovers. Whether for music or movies, these subwoofers provide powerful, immersive bass that enhances any sound system.