Panasonic DA-MC700 manual Configuring the Printer, Enabling Port and Setting Protocol

4.1Configuring the Printer

When using AppleTalk protocol to print from Macintosh, select Enable for EtherTalk port from the touch panel display.

•Using EtherTalk: The printer is connected to the network.

4.1.1Enabling Port and Setting Protocol

Here, we use enabling EtherTalk on the touch panel display as an example.

Procedure

Press Settings/Meter Check.

Select Tools Mode.

Enter the access number and select Confirm. The default password is set as “11111”.

38