Setup menu list (continued)
OPERATION screen
Item | Display |
|
| Description of settings |
mode |
|
| ||
|
|
|
| |
|
|
|
|
|
DELETE | (PB) | Deletes clips. |
| |
|
| ALL CLIPS: Deletes all clips. | ||
|
| SELECT: | Deletes only the selected clips. Press the EXEC button to delete | |
|
|
|
| clips. |
|
| NO: |
| Returns to the last screen. |
|
| • Clips for which CLIP PROTECT is specified are not deleted. | ||
INDEX | (PB) | Adds indexes to clips or deletes them. | ||
|
| YES: | Adds or deletes indexes. | |
|
| NO: | Returns to the last screen. | |
CLIP PROTECT | (PB) | Protects clips to prevent accidental deletion. | ||
|
| YES: | Enables clip protection or cancels protection. | |
|
| NO: | Returns to the last screen. | |
|
| • Executing a format of the memory card (page 32) will delete all clips even if | ||
|
| they are protected. | ||
OTHER FUNCTIONS screen
Item | Display |
| Description of settings | ||
mode |
| ||||
|
|
|
|
| |
|
|
|
|
| |
IR REMOTE | (Camera) | Sets the operations of the supplied remote control unit. | |||
| (PB) | ON: | Accepts commands from the remote control. | ||
|
| OFF: | Operations are not accepted from remote control. | ||
REC LAMP | (Camera) | Sets lighting of the tally lamp. | |||
|
| FRONT: Front tally lamp (microphone side) lights. | |||
|
| REAR: Rear tally lamp (viewfinder side) lights. | |||
|
| BOTH: Both tally lamps light. | |||
|
| OFF: | The tally lamp does not light. | ||
BEEP SOUND | (Camera) | Turns the beep sound ON or OFF. | |||
|
| ON OFF |
|
|
|
|
| When ON is selected the beep is sounded, if the memory of the SD Memory | |||
|
| Card has been used up during recording. | |||
|
| When the beep is sounded, the audio signals from the output connector are | |||
|
| muted before the beep sound is output. | |||
CLOCK SET | (Camera) | Sets the | |||
| (PB) |
|
|
|
|
|
|
|
|
| indicates the factory setting. |
98