SW MODE screen (continued)
Item | Display |
| Description of settings | ||
mode |
| ||||
|
|
|
|
| |
|
|
|
|
|
|
USER3 | (Camera) | Assigns a function to the USER3 button. | |||
| (PB) | The setting contents are the same as USER1. | |||
|
| INDEX |
|
|
|
FOCUS | (Camera) | Assigns a function to the FOCUS ASSIST button. | |||
ASSIST |
| EXPANDED: The central part of the screen will be enlarged by a factor of about | |||
|
|
| 4 in the vertical direction and by a factor of about 6 in the horizontal | ||
|
|
| direction. | ||
|
|
| “EXPANDED” is displayed on the screen during the expanded | ||
|
|
| display. | ||
|
| GRAPH:Displays a frequency distribution graph at the top right in the viewfinder | |||
|
| and LCD monitor. | |||
|
| BOTH: Magnifies the center portion of the image and displays a frequency | |||
|
| distribution graph. | |||
|
| (The frequency distribution graph is displayed on either the viewfinder or | |||
|
| the LCD monitor.) | |||
WFM | (Camera) | Switches the waveform display that appears when the WFM button is pressed. | |||
|
| WAVE: | Displays as a waveform. Each time the button is pressed the | ||
|
|
| setting changes in this order: OFF → WAVE (waveform) → OFF. | ||
|
| VECTOR: | Displays as a vector. Each time the button is pressed the setting | ||
|
|
| changes in this order: OFF → VECTOR → OFF. | ||
|
| WAVE/VECTOR:Each time the button is pressed the setting changes in this order: | |||
|
|
| OFF → WAVE (waveform) → VECTOR → OFF. | ||
LCD | (Camera) | Assigns a function to the LCD button. | |||
| (PB) | LCD REV: | Flips the LCD image vertically and horizontally. | ||
|
| LCD BL: | Switches the brightness of the LCD backlight. | ||
|
| • The backlight brightness setting registered in LCD BL will remain stored | |||
|
| even if the function allocated to the LCD button is changed. | |||
|
|
|
|
| indicates the factory setting. |
Menu
89