Setup menu list
SCENE FILE screen
Item
Display
mode
Description of settings
CARD READ/ | (Camera) | Reads and writes scene files on the SD Memory Card. | |||
WRITE |
| READ: Reads scene files (all scenes, F1 to F6) saved on the SD Memory Card | |||
|
|
| after setting values are selected. | ||
|
| WRITE: Saves current scene file setting values (for all scenes, F1 to F6) on the | |||
|
|
| SD Memory Card. | ||
|
| NO: | Returns to the last screen. | ||
LOAD/SAVE/ | (Camera) | LOAD: | Loads the scene file settings which is saved by this camera. | ||
INIT |
| SAVE: Saves the changed scene file settings. | |||
|
| INITIALIZE: The settings of the scene file selected with the SCENE FILE dial | |||
|
|
| are returned to the factory settings. | ||
|
| NO: | Returns to the last screen. | ||
SYNCRO | (Camera) | Adjusts the synchro scan shutter speed used for shooting images on a TV | |||
SCAN |
| screen, etc. | |||
|
| Holding the Operation lever toward the or will cause the values to change at | |||
|
| a faster rate. | |||
|
| • 60P/60i: | |||
|
| 1/60.0…1/249.8 (Factory default setting is 1/48.0) | |||
|
| • 30P: |
|
|
|
|
| 1/30.0…1/48.0…1/249.8 | |||
|
| • 24P: |
|
|
|
|
| 1/24.0…1/48.0…1/249.8 | |||
DETAIL LEVEL | (Camera) | Adjusts the level of the image outline correction (in the horizontal and vertical | |||
|
| directions). | |||
|
| - 7…0…+ 7 | |||
V DETAIL | (Camera) | Adjusts the level of outline correction in the vertical direction. | |||
LEVEL |
| - 7…0…+ 7 | |||
DETAIL | (Camera) | Adjusts the level of noise reduction of the detail signal. | |||
CORING |
| - 7…0…+ 7 | |||
|
| Set to – for a clearer image. Noise increases slightly. | |||
|
| Set to + to reduce noise. | |||
CHROMA | (Camera) | Adjusts the chroma level. | |||
LEVEL |
| - 7…0…+ 7 | |||
CHROMA | (Camera) | Makes fine adjustments to the chroma phase. | |||
PHASE |
| - 7…0…+ 7 | |||
COLOR TEMP | (Camera) | Makes fine adjustments to the color temperature (after white balance Ach | |||
Ach |
| adjustment). | |||
|
| - 7…0…+ 7 | |||
COLOR TEMP | (Camera) | Makes fine adjustments to the color temperature (after white balance Bch | |||
Bch |
| adjustment). | |||
|
| - 7…0…+ 7 | |||
MASTER PED | (Camera) | Adjusts the master pedestal (black level of the image) as the basis for images. | |||
|
| - 100…0…+ 100 | |||
A.IRIS LEVEL | (Camera) | Sets the desired AUTO IRIS level. | |||
|
| - 10…0…+ 10 | |||
|
|
|
|
| indicates the factory setting. |
86