Outlaw Audio ECS-10 guide

Owner’s Manual

Subwoofers, Bass and Overall System Performance

Subwoofers, Bass and Overall

System Performance

The goal of an audio system is to recreate the source material as accurately as possible. The components needed to perform this task are an audio source, a receiver or processor/amplifier combination, and speakers.

In the era of digital, multi-channel sound, many listeners have chosen to use frequency-limited “satellite” speakers for the front, center and surround channels. By limiting their frequency range, these speakers may be made smaller, to more easily fit into a wide range of spaces. However, by eliminating the capability to reproduce bass frequencies, a separate speaker that is custom designed to deal with signals below 200Hz is required. That speaker, along with its companion, built-in amplifier is a powered subwoofer.

Even in two-channel systems with traditional bookshelf or tower speakers the

bottom two octaves of sound (20 Hz to 80 Hz) are frequently rolled off or not reproduced at all. Here, too, a specialized speaker/amplifier combination is required to deliver the full spectrum of sound from a system.

Finally, many multi-channel digital soundtracks contain a special audio channel devoted specifically to extreme low frequency extension. This signal is the “.1” in 5.1, 6.1 and 7.1 systems and is sometimes referred to as the LFE channel.

Regardless of which of these situations create the need, a subwoofer is absolutely essential for accurate audio reproduction of both movies and music. A properly designed subwoofer such as the Outlaw ECS-10 can provide a visceral impact that most speakers are not able to provide on their own. No matter what type of speakers comprise the rest of your system or what your favorite movie or music is the ECS-10 is up to the task of completing the sonic presentation by providing the impact that only a subwoofer can provide.

ECS-10 Rear Panel

ECS-10

POWER

OFF

120V~

60HZ

		A
SUBWOOFER		B
VOLUME
MIN	MAX	C
AUTO ON/OFF INACTIVE	ACTIVE	C
	80 Hz
LOW-PASS		D
CROSSOVER
120 Hz	40 Hz
INTERNAL	SUBWOOFER	E
X-OVER	DIRECT	E
PHASE	180°	F

		OUTPUT		G
		INPUT		H
SPEAKER LEVEL INPUT				LFE
SPEAKER LEVEL INPUT
+ R	-	-	L	+

WARNING: TO REDUCE THE RISK OF FIRE

OR ELECTRIC SHOCK, DO NOT EXPOSE

THIS APPLIANCE TO RAIN OR MOISTURE

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

AVIS: RISQUE DE CHOC ÉLECTRIQUE. NE PAS OUVRIR

Outlaw Audio

ECS-10 specifications

Outlaw Audio is known for producing high-quality audio components that deliver exceptional performance without breaking the bank. One of their standout products, the ECS-10, is a versatile and powerful subwoofer that has garnered attention from both audiophiles and casual listeners alike. Designed to enhance home theater and music listening experiences, the ECS-10 boasts a range of impressive features and technologies.

At the heart of the ECS-10 is its robust 10-inch long-throw driver. This driver is specially engineered to provide deep and impactful bass response, making it an ideal choice for anyone looking to upgrade their audio setup. The long-throw design ensures that the driver can move more air, resulting in increased efficiency and better sound reproduction, particularly in the lower frequency ranges that are critical for a fulfilling audio experience.

One of the standout characteristics of the ECS-10 is its advanced, internally braced enclosure. This construction technique minimizes unwanted resonance, allowing the subwoofer to deliver clean and precise bass without distortion. Furthermore, the enclosure is designed to reduce cabinet vibration, which can negatively impact sound quality. The overall aesthetic is sleek and modern, allowing the ECS-10 to fit seamlessly into a variety of home decor styles.

The ECS-10 features a built-in amplifier with a power output of 200 watts RMS, which can peak at 450 watts. This powerful amp ensures that the subwoofer can handle intense bass frequencies effortlessly, providing a dynamic audio experience. The amplifier also includes various adjustment options, such as phase control, level adjustment, and low-frequency roll-off, allowing users to customize the subwoofer's performance to suit their specific preferences and room acoustics.

Connectivity is another strong point of the ECS-10. It includes both line-level RCA inputs and speaker-level inputs, making it compatible with a wide array of home theater receivers and audio systems. This versatility allows for easy integration into existing setups, whether for movies, music, or gaming.

Overall, Outlaw Audio’s ECS-10 subwoofer stands out for its powerful performance, sophisticated design, and flexibility. With advanced engineering and a commitment to audio quality, it successfully enhances any audio experience, making it a worthy addition to both casual and serious sound enthusiasts’ systems. Whether enjoying a thrilling cinematic experience or listening to a favorite album, the ECS-10 is designed to impress.