Panasonic AV-HS300G manual Wipe area, 3

Page 10

1. Functions in each area

1-3. Wipe area

Wipe pattern selector switches [WIPE PATTERN / FUNC]

These are used to select the wipe patterns. Each switch is used to select one of the nine wipe patterns.

The indicator of the switch for the selected pattern lights (in amber). When the [FUNC] switch (9) has been pressed and its indicator is lighted, the function setting menu is selected, and the indicator lights up green.

Wipe direction selector switch [N N/R R]

This is used to select the wipe direction. See 2-2-2

[N]: For setting the wipe direction to the normal direction.

[N/R]: To switch the wipe direction between normal and reverse when the execution of the transition has been completed.

[R]: For setting the wipe direction to the reverse direction.

[FUNC] switch

When this switch is pressed, its indicator lights up green. If a wipe pattern selector switch is pressed while its indicator is lighted, the wipe pattern selector switch lights up green, and the setting menu of the function indicated underneath the switch appears on the LCD display.

[TIME]:

For setting the auto transition time.

See 2-1-5

[WIPE]:

For setting the wipe border and soft effect.

See 2-2-3

[CBGD]:

For setting the color background.

See 2-4

[KEY]:

For setting the key.

See 2-3

[EDGE]:

For setting the key edge.

See 2-3-5

[FRZ]:

For displaying the freeze status display and setting freezing.

See 2-5

[MEM]:

For setting the preset memory or frame memory.

See 2-6, 2-7

[XPT]:

For displaying and setting the crosspoint assignment.

See 3-4

[SETUP]: For performing the system settings.

See 3

Freeze status indicator LED

When this LED is lighted, it means that one of the input signals is frozen.

When the [FUNC] switch (9) is pressed and its indicator is lighted and then the [FRZ] switch is pressed, the

freeze status is indicated for each input. (An asterisk () appears above the name of a frozen crosspoint.) Bear in mind that since the signals are frozen while the indicator is lighted, the unit’s output will remain unchanged even if the input images change.

(When crosspoints 3 and 5 are frozen)

'3;

 

'3;

 



 

915

 

 

 

 

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Operating Instructions Safety precautions FCC NoteImportant Safety Instructions For business users in the European Union Contents Features Description Maintenance Precautions for use Power off before connecting or disconnecting cables  Handle carefullyAlarm indicator Alarm  Power indicator Power Power switch Functions in each area Source selector switches Source SELECT/AUX, KEY-S, KEY-F  PGM/A bus crosspoint switches PGM/A 1 to PST/B bus crosspoint switches PST/B 1 to Crosspoint areaWipe area 3Transition area  Bus tally LEDs LCD menu area Fader lever  Rotary encoders F1 to F4Rear panel connections area Transitions Selecting the bus modeBasic operations 11#,% 53/45*.& 6/*5  T G 4&$ Selecting the transition modeManual transition using the fader lever  53/45*.& 6/*5 G Selecting the wipe direction WipeSelecting the wipe pattern Wipe decorations border, soft effectOperation Parameter Description of setting Setting range Setting the border colorAdjusting the border color 643 6& 45 -6.     ‰ ‰ ‰Key Selecting the key source signalsSelecting the key source 51& */7 178  -*/ 0 0/ 0/ 0 Setting the keyKey adjustments ‰ ‰ ‰Selecting key fill Selecting the key fill signals51& $0-3  #64 85 Selecting the fill color643 6& 45 -6.     ‰ ‰ ‰ Adjusting the fill colorSetting the key edge Key decorationsAdjusting the edge color Color background Adjusting the color background$#% $0-3  85 Freezing the input signals */ */ */ */ */ %7 0Frame memory 4503  69 .&. &9&$‰ $-3 Preset memory4503 Transition areaClear This is used to clear contents in the preset memory 14.&  %4#Setting the input signals in 1 to SetupSetting the input signals Setting the input signal frame synchronizerSD/NTSC SD/PAL Setting the DVI input signals IN60%& 4$-  %* /03 XGAAdjustment ‰ ‰ ‰Types of output signals Setting the output signalsSelecting the AUX signals J Q Q J J Selecting the video format03.5 HD/SD9154  Setting the crosspointsAssigning signals to the crosspoints 9154 4* #-, 915 Switch Signal Description Setting the crosspoint switching91548 5*.     Setting the sync signals Sync Bbst Exec Bbad TRI INTAdjusting the output signal phase 0614 714Phase adjustment setup 3YSTEMSSTANDARDSetting the IP address Network settingsSetting the subnet mask   Setting the gatewaySetting the MAC address  BB signal setup level Other settingsSetting the ancillary data 44 #- 7/$ ##  0/ 0  0 0/ 4554 7&3  / /-  1083 /0 1 /0 Status displaysInitialization &4Setting menu table Clip Gain Dens Type INV PVWADJ FillXPT MEM PsmemMode FmemMode Scal SetupSIG Mode Gain DviinDviph Setup SYSVanc Ckph Hpos VposImage transmission functions SpecificationsConnections How to install the program Exit Setting the IP addressStartup OperationTransmitting images to the unit Transmitting images from the unitPin No Signal name Description of signal RS-422 connectorGPI connector External interfacesExample of tally connections Tally connectorAV-HS300G Connections AV-HS300GExample where the optional HD analog board is used Appearance Unit inch mmSpecifications and standard accessories SpecificationsStandard accessories Optional accessoriesAvdl Appendix glossaryAUX DVIPGM GPIIRE PSTSDI Memo Memo Page Eastern Zone
Top Page Image Contents