Panasonic CF-Y7 series appendix Handling and Maintenance, Click Larger scale 120 DPI and click OK

Handling and Maintenance

Troubleshooting Useful Information Getting Started

CAUTION

You will be unable to set [Computrace (R) BIOS Module] to [Disable] once you have set to [Enable]. Do not change the setting when not used.

•Even if you have set [Computrace (R) BIOS Module] to [Enable], this setting may return to [Disable] after repairs to the motherboard, etc. have been made.

NOTE

Consult Absolute Software Corp. before disposal.

Refer to the following URL for Computrace® software for installation and available service regions. Note that this service is only available in certain regions.

http://www.absolute.com

1 Turn on or restart the computer, and press F2 while [Panasonic] boot screen is dis- played.

The Setup Utility starts up.

If the password is requested, enter the Supervisor Password.

2Select the [Security] menu, then select [Computrace (R) Sub-Menu] and press Enter.

3Select [Computrace (R) BIOS Module], and set to [Enable].

4At the confirmation message, select [Execute] and press Enter.

5At the reconfirmation message, select [Execute] and press Enter.

6Press F10.

At the confirmation message, select [Yes] and press Enter.

The computer restarts.

Maintenance

To clean the LCD panel and touch pad

Wipe lightly with a gauze or other dry, soft cloth.

To clean areas other than the LCD panel and touch pad

Wet a soft cloth with water or a diluted kitchen cleanser (neutral), wring the cloth out thoroughly, and wipe the dirty area gently. Using a detergent other than a neutral kitchen cleanser (e.g., a weak alkali cleanser) may adversely affect painted surfaces.

CAUTION

Do not use benzene, thinner, or rubbing alcohol since it may adversely affect the surface causing discoloration, etc. Do not use commercially-available household cleaners and cosmetics, as they may contain components harmful to the surface.

Do not apply water or detergent directly to the computer, since liquid may enter inside of the computer and cause malfunction or damage.

Appendix

When Using the Computer with a Reduced Screen Resolution

When setting the screen resolution to a resolution below the LCD's resolution, e.g. 1024 × 768 pixels, the images appearing on the screen will be stretched. As a result, the characters displayed may appear blurred. This is normal, and not indicative of a malfunction.

To display large characters with no blurring

Try the following steps while keeping the LCD in its resolution (1400 × 1050).

1 Right-click the desktop and click [Personalize] - [Adjust font size (DPI)].

A standard user needs to enter an administrator password.

2 Click [Larger scale (120 DPI)] and click [OK].

To display enlarged font sizes in applications such as Internet Explorer:

Use the display enlargement function provided by the specific software application.

To magnify a part of the screen, use the Loupe Utility.

20