Display (continued)
An afterimage appears (e.g., | If an image is displayed for a prolonged period of time, an afterimage may appear. This |
green, red, and blue dots | is not a malfunction. The afterimage will disappear when a different screen is displayed. |
remain on the display) or | |
there are dots not display- | crystal displays (color LCDs). Therefore, if 0.002% or less of the picture elements either |
ing the correct colors | fail to light or remain constantly lit (that is, more than 99.998% of elements are function- |
| ing properly), no defect is considered to exist. |
The screen becomes disor- | Changing the number of colors or resolution of the display may affect the screen. Restart the |
dered | computer. |
The external display no | When an external display not compatible with the power saving mode is used with the |
longer displays properly | computer, the external display may no longer display properly when the computer enters the |
| condition the power of the display is off (for energy conservation purposes). In such cases, |
| turn off the power to the external display. |
During simultaneous dis- | Try switching the display destination by pressing Fn + F3 . |
play, the screen of the exter- | If the external screen is not displayed even after switching screens using Fn + F3 , |
nal display becomes disor- | try switching the display destination using the following procedure: |
dered | Windows 2000 |
| [Start] - [Settings] - [Control Panel] - [Intel® Extreme Graphics] |
| Windows XP |
| [start] - [Control Panel] - [Other Control Panel Options] - [Intel® Extreme Graphics] |
The screen does not fill up | If the screen resolution is set to 800 x 600 or less and the screen is set to simultaneous |
the entire display (i.e., the | display, the screen will not fill up the entire display. Also, if the screen is set to Extended |
screen is shown in the cen- | Desktop, the screen may not fill up the entire display. |
ter of the display |
|
When an MPEG file is be- | The display destination cannot be switched while an MPEG file is playing. Stop playing the |
ing played with Media | MPEG file before switching the display destination. |
Player, the display destina- |
|
tion cannot be switched us- |
|
ing Fn + F3 |
|
Shutting down |
|
Windows cannot be shut down or restarted
If a USB device is connected, try removing it.
Battery Indicator
The red indicator lights
The red indicator blinks
The orange indicator blinks
The battery level is low. Save your data and power off your computer.
After connecting the AC adaptor or replacing the battery pack with a fully charged one, turn your computer on.
The battery pack or recharging function may be defective. Quickly save current data and exit Windows. Remove the battery pack and disconnect the AC adaptor, then connect them again.
If the problem persists, contact your technical support office (
page 32).
Unable to recharge due to violation of temperature limits. The ambient temperature is out- side the allowable range. Once the allowable range requirement is satisfied, charging begins automatically.
Troubleshooting
23