First-time Operation
Battery Pack
Latches
Read the steps below to help you learn what parts are included, and to gain an understanding of some basic
1 Confirm the inclusion of all parts
Make sure the parts shown in the figure have been supplied. If any of these items are missing or is not working properly, contact your technical support office (
page 32).
AC adaptor | 1 AC Cord | 1 Battery Pack | 1 |
| Cable | 1 | (This book) | 1 | Started | |
Model No : |
|
| Model |
|
| |
Product Recovery | Modem Telephone | Operating Instructions | Getting | |||
Windows 2000 | ....2 |
|
| Windows® Book .... | 1 | |
|
|
| ||||
Windows XP | 3 |
|
|
|
|
|
Refer to page 8 for details on the carrying cloth for protecting the keyboard.
<Only for models with touchscreen>
Soft Cloth | 1 | Stylus | 1 |
|
|
|
|
(
“Touchscreen”)
2 Read the LIMITED USE LICENSE AGREEMENT (
page 27) Before removing the seal covering the power switch, read the LIMITED USE LICENSE AGREEMENT.
3 Turn the computer over and insert the battery pack
Make sure the battery pack is facing the correct direction, slide it in the direction of the arrow, and then check to ensure that the battery pack is held firmly by the latches on the left and right sides.
CAUTION
Be sure the battery pack is properly connected to the connector.
Do not touch the terminals on the battery pack and the computer. The battery pack may no longer function properly if the contacts are dirty or damaged. Also, the computer may not operate properly.
Before using the battery pack, carefully read “Precautions (Battery Pack)”
( | page 6). |
9