Contents, Precautions with regard to safety

Contents
Preparation
IMPORTANT SAFETY NOTICE	2
Precautions with regard to safety ....	5
Accessories	9
Precautions on handling	10
Location and function of
each part	12
Using the remote control unit	17
Inserting the battery	17
Operating range	17
Connections	18
Notes on connections	18
Example of connecting to video
equipment	18
Example of connecting to
computer	19
Example of connecting to equipments
compatible with YPBPR(CBCR)
signals	20
Setting-up	21
Projection methods	21
Projector position	21
Basic Operation
Starting to use	22
Turning on the power	22
Turning off the power	23
On-screen menus	24
Menu screens	24
Menu operation guide	26
Unavailable on-screen
menu items	26
Returning to the previous screen....	26
Returning a setting to the factory
default	27
Using the freeze function	27
Using the DIGITAL ZOOM
function	28
Correcting keystone distortion	29
Setting the ASPECT	30
Using the index window function...	32
Using the shutter function	33
Changing the display
language	33
Muting the sound	33
Adjusting the picture	34
PICTURE MODE	34

COLOR	34
TINT	34
BRIGHT	34
CONTRAST	35
SHARPNESS	35
TV SYSTEM	35
Color Hue Setting	35
WHITE BALANCE R/G/B	35
SIGNAL MODE	35
Adjusting the position	36
HORIZONTAL POSITION	36
VERTICAL POSITION	36
DOT CLOCK	36
CLOCK PHASE	36
ASPECT	36
AUTO SETUP	37
Advanced Operation
Option settings	37
OSD	37
PC PRIORITY	37
BACK COLOR	37
4:3 H-POS	37
FRONT/REAR	38
DESK/CEILING	38
LAMP POWER	38
LAMP TIME	38
FUNCTION	38
Others
Indicators	39
Cleaning and replacing
the air filter	41
Replacing the lamp unit	42
Before asking for service	45
Specifications	47
Appendix	49
List of compatible signals	49
Connector pin wiring	50
Projection dimensions calculation
methods	50
Dimensions	51

Precautions with regard to safety

WARNING

If a problem occurs (such as no image or no sound) or if you notice smoke or a strange smell coming from the projector, turn off the power and disconnect the power cord from the wall outlet.

BDo not continue to use the projector in such cases, otherwise fire or electric shocks could result.

BCheck that no more smoke is coming out, and then contact an Authorized Service Center for repairs.

BDo not attempt to repair the projector yourself, as this can be dangerous.

Do not install this projector in a place which is not strong enough to take the full weight of the projector.

BIf the installation location is not strong enough, it may fall down or tip over, and severe injury or damage could result.

Installation work (such as ceiling suspension) should only be carried out by a qualified technician.

BIf installation is not carried out correctly, there is the danger that injury or electric shocks may occur.

If foreign objects or water get inside the projector, or if the projector is dropped or the cabinet is broken, turn off the power and disconnect the power cord from the wall outlet.

BContinued use of the projector in this condition may result in fire or electric shocks.

BContact an Authorized Service Center for repairs.

Do not cover the air inlet or the air outlet.

BDoing so may cause the projector to overheat, which can cause fire or damage to the projector.

Do not overload the wall outlet.

BIf the power supply is overloaded (for example, by using too many adapters), overheating may occur and fire may result.

Do not remove the cover or modify it in any way.

BHigh voltages which can cause fire or electric shocks are present inside the projector.

BFor any inspection, adjustment and repair work, please contact an Authorized Service Center.

Clean the power cord plug regularly to prevent it from becoming covered in dust.

BIf dust builds up on the power cord plug, the resulting humidity can damage the insulation, which could result in fire. Pull the power cord out from the wall outlet and wipe it with a dry cloth.

BIf not using the projector for an extended period of time, pull the power cord plug out from the wall outlet.

Preparation