Panasonic PT-AE4000U Do not insert any foreign objects into the projector, Lamp replacement

Page 7

Do not place your hands or other objects close to the air outlet port.

Doing so will cause burns or damage your hands or other objects.

zz Heated air comes out of the air outlet port. Do not place your hands or face, or objects which cannot withstand heat close to this port.

Do not look into or touch the lights emitted from the lens while the projector is being used.

Doing so can cause burns or loss of sight.

zz Strong light is emitted from the projector’s lens. Do not look or place your hands directly into this light. zz Be especially careful not to let young children look

into the lens. In addition, turn off the power and disconnect the power plug when you are away from the projector.

Do not insert any foreign objects into the projector.

Doing so will cause fire or electric shocks.

zz Do not insert any metal objects or flammable objects into the projector or drop them onto the projector.

Never attempt to remodel or disassemble the projector.

High voltages can cause fire or electric shocks.

For any inspection, adjustment and repair work, please contact an Authorized Service Center.

Do not use the projector while the projection lens cap is still attached to the projection lens.

If this is not observed, the lens cap will be damaged and fire will occur.

„„ACCESSORIES

Do not use or handle the batteries improperly, and refer to the following.

Failure to observe this will cause burns, batteries to leak, overheat, explode or catch fire.

zz Do not use unspecified batteries.

zz Use manganese batteries or alkaline batteries. zz Do not dissemble dry cell batteries.

zz Do not heat the batteries or place them into water or fire.

zz Do not allow the + and − terminals of the batteries to come into contact with metallic objects such as necklaces or hairpins.

zz Do not store batteries together with metallic objects. zz Store the batteries in a plastic bag and keep them

away from metallic objects.

zz Make sure the polarities (+ and −) are correct when inserting the batteries.

zz Do not use a new battery together with an old battery or mix different types of batteries.

zz Do not use batteries with the outer cover peeling away or removed.

zz Remove the empty batteries from the remote control at once.

zz Insulate the battery using tape or something similar before disposal.

Precautions with regard to safety

Do not allow children to reach the batteries.

zz The battery can cause death by suffocation if swallowed.

zz If swallowed, seek medical advice immediately.

If the battery fluid leaks, do not touch it with bare hands, and take the following measures if necessary.

zz Battery fluid on your skin or clothing could result in skin inflammation or injury.

Rinse with clean water and seek medical advice immediately.

zz Battery fluid coming in contact with your eyes could result in loss of sight.

In this case, do not rub your eyes. Rinse with clean water and seek medical advice immediately.

Do not disassemble the lamp unit.

If the lamp breaks, it could cause injury.

Lamp replacement

The lamp has high internal pressure. If improperly handled, an explosion and severe injury or accidents will result.

zz Replacement of the lamp should be carried out by a qualified technician.

zz The lamp can easily explode if struck against hard objects or dropped.

zz Before replacing the lamp, be sure to disconnect the power plug from the wall outlet.

Electric shocks or explosions can result if this is not done.

zz When replacing the lamp, allow it to cool for at least one hour before handling it otherwise it can cause burns.

Do not allow infants or pets to touch the remote control unit.

zz Keep the remote control unit out of the reach of infants and pets after using it.

CAUTION

„„POWER

When disconnecting the power cord, hold the plug, not the cord.

If the power cord itself is pulled, the cord will become damaged, and fire, short-circuits or serious electric shocks will result.

When not using the projector for an extended period of time, disconnect the power plug from the wall outlet and remove the batteries from the remote control.

Disconnect the power plug from the wall outlet before carrying out any cleaning.

Electric shocks can result if this is not done.

Important Information

ENGLISH - 7

Image 7
Contents Operating Instructions PT-AE4000U Important Safety NoticeModel Number PT-AE4000U Trade Name This symbol is only valid in ChinaDeclaration of Conformity Environment care information for users in ChinaLens Memory Contents Precautions with regard to safety Do not allow children to reach the batteries Lamp replacementDo not insert any foreign objects into the projector Never attempt to remodel or disassemble the projectorAlways disconnect all cables before moving the projector Do not put your weight on this projectorZzDo not set up the projector outdoors Do not place the projector in extremely hot locationsZzDo not clean the lens surface with fuzzy or dusty cloths Cleaning and maintenanceDisposal Power cord secure lock AccessoriesRemote control for Safety cable Lens cover Power cord CD-ROMPower button Remote controlAbout Your Projector JJ Top and front view Projector bodyAir intake port Security lock Top cover JJ Back and bottom viewScreen size and throw distance Setting upProjection method Lens shift and positioning Before connecting to the projectorJJ Adjusting the lens shift dials ConnectionsJJ Connecting Switching the projector on/offPower cord Power indicatorSwitching off the projector Switching on the projectorPress the power or Enter button Projecting an image Selecting the input signalSwitch on the connected devices Adjust the focus and the projected image sizeNavigating through the Menu Menu NavigationDefault It is possible to adjust the picture qualityMenu list It is possible to link with the connected equipment It is possible to adjust the image size and positionIt is possible to adjust the lens position It is possible to change the display languageOption It is possible to change the option settingsViera Link Using the Link functions Viera LinkQQ Access and operate the menu of the equipment If you access non-VIERA Link equipmentJJ Other manufacturer’s equipment control Access and operate the speaker volumeMute setting JJ Speaker controlJJ Lamp indicator Temp and Lamp IndicatorsManaging the indicated problems JJ Temp indicatorCleaning the projector Care and ReplacementJJ Opening the top cover JJ When to replace the lamp unitReplacing the lamp unit JJ Before replacing the lamp unitJJ Removing and replacing the lamp unit JJ Resetting the Lamp RuntimeAttaching the top cover Troubleshooting Loop twice Loop once Ceiling mount bracket safeguardsJJ Installing the safety cable Technical InformationRGB/YPBPR List of compatible signalsSpecifications Terminals DimensionsWeight Remote control WeightTrademark acknowledgements DimensionsUnit mm Lens Control IndexP1009-1109B TQBJ0309