Menu operation guide
#Press the MENU button.
The menu screen will be displayed.
$Press the F or G button to select an item from the main menu on the left side.
&Press the F or G button to select an item, and then press the I or H button to adjust the value or change the setting.
For items with selective setting or a bar scale, the individual adjustment screen will be displayed as shown below. Press the F or G button to switch the item.
The value and setting indicator will turn green when any adjustment changes from the factory set value. For items without any selective setting or bar scale, press the ENTER button. The next screen for the item will then be displayed.
Unavailable on- screen menu items
This projector has unadjustable items and unusable functions depending on the signal being input.
When an item cannot be adjusted or a function cannot be used, the corresponding
Projector control panel
The selected item will be displayed in orange.
The
%Press the ENTER button.
Returning a setting to the factory default
If you press the NORMAL button on the remote control unit, you can return |
|
settings to the factory default settings. However, the operation of this function | settings |
BWhen a menu screen is being displayed | |
varies depending on which screen is being displayed. |
|
All the items on the | and |
| |
their factory default settings, and the value and setting indicator will | Adjustments |
the value and setting indicator will appear white. | |
appear white. |
|
BWhen an individual adjustment screen is being displayed
Only the item displayed will be returned to the factory default setting, and
NOTE:
BPress the MENU
button or the RETURN button on
the remote control
You can select an item from the
unit to return to the previous screen.
NOTE:
BA triangle symbol below a bar scale indicates the factory default setting. Items which do not have this triangle symbol cannot be returned to the factory default setting. The positions of the triangle symbols vary depending on the type of signal being input.
Indicates the current adjustment value
Indicates the standard factory default setting