Panasonic PT-AE900U manual Dimensions, Projection dimensions calculation methods, Inquiry commands

				Projection dimensions calculation methods
(Continued from previous page.)				Dimensions such as projection distances can be calculated from the screen
				diagonal length. (Units for calculations: m)
Command	Control contents		Remarks	16:9
		Parameter
		NAT=NATURAL	NOR=NORMAL	SH
VPM	Picture mode	DYN=DYNAMIC	CN1=CINEMA1
	selection	CN2=CINEMA2	CN3=CINEMA3
		VID=VIDEO
		(Refer to page 33 for details.)
OST	Returning to the	Use this command to return the setting to		SW	LW/LT
	default setting	the factory default. (page 43)		Screen Width: SW=SDx0.872
				Screen Height: SH=SDx0.490
Inquiry commands				Minimum Projection Distance: LW=1.2244xSD-0.056
				Maximum Projection Distance: LT=2.4449xSD-0.056
Command	Inquiry contents		Parameter	*The values obtained from the formulas above are approximate.
QPW	Power condition	000=OFF	001=ON
		VID=VIDEO	SVD=S-VIDEO
QIN	Input signal	RG1=PC	YUV=YPBPR1	Dimensions
		HDM=HDMI	CP1=YPBPR1
		CP2=YPBPR2			<Units: mm (inch)>
		NAT=NATURAL	NOR=NORMAL
		DYN=DYNAMIC	CN1=CINEMA1
QPM	Picture mode	CN2=CINEMA2	CN3=CINEMA3
		VID=VIDEO
		(Refer to page 33 for details.)			˝)
				270(10-5/8˝)	255(10-1/32
QSH	Shutter function	0=OFF	1=ON
QFZ	Freeze function	0=OFF	1=ON
Cable specifications
(When connected to a personal computer)

At the projector		At the computer
		(DTE specifications)
	1		7
	2		8
	3		3
	4		5
	5		2
	6		6
	7		1
	8		4
			9

82.9 (3-1/4˝)

335 (13-3/16˝)

	104 (4-3/32˝)
54 (2-1/8˝)

(3-9/32˝)	95
84

Others

68-ENGLISH ENGLISH-69