Using WebBrowser (cont.)
Time settings
Click [Detailed set up]→[Adjust clock] in the menu.
Time zone: Select the time zone and click [Set time zone].
Time | : Enter the current date and time in |
| [Date] and [Time], and then click [Set |
| date and time]. |
Email settings
You can specify two email recipients.
Click [Detailed set
• [MAIL SERVER] |
|
ENABLE | : Enable or disable email transmission. |
SMTP SERVER NAME | : Enter the SMTP server name. |
• [MAIL OPTION] |
|
MAIL FROM | : Enter the sender’s email address. |
MEMO | : Enter a description of the sender. |
• [TEMPERATURE WARNING SET UP]
MINIMUM TIME: Enter the interval for sending email.
INPUT AIR TEMPERATURE : Select the temperature of the intake sensor at which to send a warning message.
• |
|
: Enter the email addresses of the | |
| recipients. |
MAIL CONTENTS | : Change the type of message as |
| desired. |
| When sending messages to mobile |
| phones, select “SIMPLE.” |
ERROR | : Select ON to send email when errors occur. |
LAMP RUNTIME | : Select ON to send email when “at REMAIN” is reached. |
FILTER REMAINING TIME | : Select ON to send email when “at REMAIN” is reached. |
INPUT AIR TEMPERATURE : Select ON to send email when the temperature set in [TEMPERATURE WARNING SET UP] is
| exceeded. |
PERIODIC REPORT | : Send a message with the projector status at the selected date and time. |
When [submit] is clicked, the settings are applied.
Connection test
You can confirm if a network connection is established with Mail server, POP server, DNS server or the like.
Click [Detailed setup] → [Ping test] from the network main menu.
Destination IP address: Enter the IP address of the server you want to test, and then click [Submit].
If succeeded in connection, the following display appears.
If failed in connection, the following display appears.
60