Panasonic TH-LB60NT Glossary cont, Adhoc, Infrastructure, infrastructure mode, Ssid, Open System

Page 65
Glossary (cont.)

Glossary (cont.)

Category

Item

Descriptions

Page

 

AD_HOC

This is the mode in which computers communicate with each other

49

 

 

directly, rather than via access points.

 

 

INFRASTRUCTURE

This is the mode in which communications are performed via the

22

 

(infrastructure mode)

access point.

49

 

SSID

Abbreviation for Service Set ID. The SSID identification code must

49

 

 

be set to distinguish equipment included in a wireless LAN that uses

 

 

 

access points from equipment not included in that LAN.

 

 

 

This may appear as the “ESSID” or the “network name” for wireless

 

 

 

LAN cards made by some manufacturers.

 

 

Open System/

This is an authentication of wireless signals employing a public key

49

 

OPEN

encryptosystem.

 

 

Shared Key/

This is a secret key encryptosystem for wireless signals in which

49

 

SHARED

authentication is performed with a key pre-set in the WEP.

 

 

 

Other terms for this method, in which the same key is used for both

 

Advanced

 

encryption and decryption, are “shared key encryptosystem” and

 

 

“common key encryptosystem”.

 

setting of

 

 

WPA-PSK

This is a standard covering encryption methods used in wireless LAN.

49

connection

WPA2-PSK

It provides greater security than WEP, and has functions such as a

50

 

 

 

user authentication function and also TKIP (encryption protocol) which

 

 

 

automatically changes the encryption key at fixed intervals.

 

 

 

And this authentication requires no authentication server.

 

 

WEP

Abbreviation for Wired Equivalent Privacy. This is a method for

15

 

 

encrypting communication data. The encryption key is created and

49

 

 

notified only to the communicating user, so the communication data

50

 

 

cannot be decrypted by a third party.

 

 

TKIP

Abbreviation for Temporal Key Integrity Protocol.

49

 

 

This encryption protocol provides even greater security than WEP

 

 

 

because it changes the encryption key at fixed intervals.

 

 

AES

Next generation standard cryptography standerdized by the National

15

 

 

Institute of Standards and Technology (NIST).

49

 

 

AES: Advanced Encryption Standard

50

 

 

 

59

65

Image 65
Contents Wireless Manager mobile edition ENGLISHMacintosh Network Operation ManualConnecting with Wired LAN… ……………………… ContentsUsing WebBrowser… ………………………………… Network/Security setting of the projector… ………Article 6 After-sales Service Article 5 Reverse Engineering, Decompiling or DisassemblySoftware Licensing Agreement Article 1 LicenseDo not use near other wireless equipment Notes on Using Wireless ConnectionAvoid using the projector in locations prone to static electricity Using the projector outside the countryWired LAN Notes on Using Wireless Connection contChannels that can be used Country or regionRequest Regarding Security Precautions for Security when Using a Wireless LAN ProductProject with various methods Live Mode See page Network TransmissionMulti Live Mode See page What you can do with Wireless Manager mobile editionProject with multiple projectors What you can do with Wireless Manager mobile edition 5.5 contUseful functions Multiple source live mode See pageWebBrowser control See page Virtual remote control function See pageOne-click Connection See page Live mode cut-in function See pageCheck 1 Wireless LAN settings Wireless LANCheck 2 Logon user’s settings Check 3 Computer’s settingsSystem requirements Software requirementsContents on Provided CD-ROM Software InstallationWireless Manager ME Double-click Wireless Manager.pkgEasy Wireless Set Up Connecting with wireless LANCurrent settings Connecting with wireless LAN contWhen selected, the background changes to blue A Setting menu displayn Projector Search window - 1-4/U See page G Updates the list of found projectors H “Network” numberL Available modes and functions N The status of this projectorWhen the Input User Name window appears Click the install target or in the DockWhen the Network Adapter Selection window appears “S-MAP” ConnectionWhen the Confirmation dialog box appears Click 1-4/U in the setting menuIf the setting menu is not displayed, click Setting “1-4/U” ConnectionSelect the desired projectors, and click Connect window - 1-4/Uto See page “PC Search” Connection Click PC Search from the setting menuOperations on the projector Select the projector to connect4 Connection completed Connection error messages USER 1 through USER 3 for WIRELESS LAN and press ENTER Connecting through the access pointMake the network setting according to your system administrator Connect to your access point Start Wireless Manager MELaunch Wireless Manager ME Connecting with Wired LANpress ENTER Set the details of network and select ENTERSelection of adapters Other operations for connection Operations when password entry is required for connectionOther search Click at the Projector Search windowClick Search Other operations for connection contCheck the search results Click ConnectWhen connecting the projector for the first time Exit Wireless Manager1 Click Exit in the launcher menu 2 Click YesVolume control button Volume control buttonVolume control slider Mute button Various projection methodsALauncher menu button Various projection methods contLauncher Menu displayed. See page Live ModeClick Click Live Mode in the launcher menu Click Full screenMulti Live Mode Switching from one style to anotherHow to operate 4-screen multi style n Switching to a different positionClick Live Mode in the launcher menu Select and click the projection position Click on the launcherClick on the launcher 4-screen index styleSelect and click the projection position Quitting the 4-screen index style projection Enlarged displayToggle between these with the ENTER button 16-screen index styleClick 1-4/U in the setting menu Click Select Access Port in the launcher menuMultiple Source Live Mode pageThe same image is provided for all the projectors selected in step possible . See pageQuitting multiple source live mode Click Select the network number of the desired projectors. See page Multiple Source Multi Live ModeQuitting multiple source multi live mode Switching to a different positionSelective Area Transmission Useful FunctionsClick Selective Area Transmission in the launcher menu projectorAV Mute function Useful Functions contPointer function Click AV Mute in the launcher menuList of available functions in each projection method Connectable projectorsSetting options Setting optionsResolution Live Mode SettingsKey setting Setting options contClick Setting Select the mode or the function to be set forAutomatic connection setting Setting FavoritesUser settings OtherDisplaying the Network Menu Network/Security setting of the projectorPress the MENU button on the projector Select NETWORK with the buttonsWired LAN settings Network/Security setting of the projector contSelect WIRED LAN at the network menu and click the ENTER button Default wired LAN settingsUSER settings Setting network number for wireless LANSelect WIRELESS LAN at the network menu Setting IPDETAILED SETUP Wireless settingsPanasonic Projector Default settings of USER1 - USER3Enter the projector name using the Password settingSelect PASSWORD at the network menu Select PASSWORD CHANGE at the network menu and press the ENTER buttonAfter entering the password, select OK and click ENTER Enter the password using the ENTER buttonsNetwork standby Network controlComputer search Live mode cut-inMulti-live 1 Select LIVE MODE CUT IN at the network menuReturning to the initial settings Verifying settingsSelect STATUS at the network menu and press the ENTER button 1 Select INITIALIZE at the network menu and press the ENTER buttonBefore using the WebBrowser control Using WebBrowserClick Change Settings... next to Proxies on the Configuration checkbox, remove itAccessing from the WebBrowser Using WebBrowser contEnter the user name and the password Click OK Open the Security tab in SafariMonitored information Monitor information windowNetwork information n If FAILED appearsBasic control window Projector control windowAdvanced control window On this window, click the Basic control tabClick Detailed set up in the menu Detailed settings window3 CompleteNext. the detailed settings and click LAN settingsConnection test Time settingsEmail settings If SIMPLE is selected under MAIL CONTENTS If NORMAL is selected under MAIL CONTENTSAIf you have completed the email settings BIf an error occursAuthentication server settings Switching LanguagesCommand port settings Password settingsWireless Manager ME Software UninstallDouble-click WMUninstaller Double-click WMMac5.5.dmg in the CD/DVD-ROM driveSetting of Access pointDefault Gateway GlossaryGlossary cont setting ofADHOC INFRASTRUCTUREIs Wireless Manager ME 5.5 running? Frequently Asked QuestionsWhen the user does not have the Admin administrator authority Network setting errorThe connection to the wireless LAN or wired LAN is lost Frequently Asked Questions contThe connection cannot be established with IEEE802.11 g The transfer rate is slowThe WEB control window does not appear Making a wireless LAN connection while using the internetTrademarks