Panasonic PT-AE700U operating instructions Using Color Management, Profile, Edit, Cursor

Using COLOR MANAGEMENT

You can adjust, save, and retrieve the settings for the selected colors of the projected image based on the selected picture mode to suit your preference.

BPress the F or G button to select an item, press

the I or H button to change the settings, and press the ENTER button for confirmation.

Press the COLOR MANAGEMENT button.

COLOR	MNGMT
PROFILE		NORMAL
EDIT
SELECT	ADJ	ESC

PROFILE

BRetrieves the saved profile (color settings which have been adjusted).

PROFILE NORMAL

[

USER1

[

USER2

[

USER3

NORMAL When projecting images according to the setting of “PICTURE MODE” (page 29). This setting is the factory default setting.

USER1/2/3 These items are displayed only when “PROFILE SAVE” has been carried out. Refer to page 35 for details.

EDIT

BYou can edit the settings for the selected color.

EDIT

CURSOR

LOG

PROFILE SAVE

SELECT ENTER ESC

CURSOR	Lets you select a color, and adjust the color settings (page 33).
LOG	Lets you adjust the color settings again, or delete the
	settings (page 34).

PROFILE SAVE Lets you save the adjusted color settings (page 35).

NOTE:

BRefer to page 59 for the general arrangement of the “COLOR MNGMT” menu.

BYou can enter the “COLOR MNGMT” menu from the “ADVANCE MENU” in the “PICTURE” menu (page 41).

BWhen the “PICTURE MODE” menu is selected, the settings will switch automatically to the last “PROFILE” settings that were used for the selected picture mode.

BWhen retrieving a profile, “EDIT” will not be displayed if the picture mode being selected does not match the picture mode which had been selected when that profile was saved.

B“LOG” and “PROFILE SAVE” are displayed only when the colors have been adjusted in “CURSOR” menu.

CURSOR

Press the ENTER button to display the cursor (B).

#Select the color you want to adjust with the cursor.

BPress the F, G, I and H buttons to move the cursor, and then press the ENTER button.

BThe selected color (C) and the adjustment menu (A) will be displayed.

$Adjust the items in the adjustment menu.
BThe color adjusted in the adjustment menu (D) will be displayed.				functions
COLOR	Adjusts the deepness of the color.
TINT	Adjusts the hue of the color.
BRIGHT	Adjusts the brightness of the color.
%Press the ENTER button to apply the adjusted color.
BThe letters PROCESSING and the progress status bar will be displayed				Useful
while the adjusted color is applied.
BThe adjusted color settings will be saved in the “LOG” menu.
If you would like to continue to adjust another color after adjusting a color,
press the MENU button,and then repeat the steps from step #.
A	CURSOR
	COLOR	0
	TINT	0
	BRIGHT	+2
	SELECT ADJ	ESC
	B
	C˛	D˛	Screen

&Press the MENU button twice, and then save the adjusted color settings.

BSelect the “PROFILE SAVE” menu from the “EDIT” menu. The adjusted color settings will not be saved until you carry out “PROFILE SAVE”.

32-ENGLISH ENGLISH-33