Panasonic Essential Maintenance for Your PT-AE700U Projector
Page 26

Cleaning and replacing the air filter

Replacing the lamp unit

If the air filter becomes clogged with dust, the internal temperature of the projector will rise, the TEMP indicator will illuminate and the projector’s power will turn off (the TEMP indicator will flash after the power is turned off).

The air filter should be cleaned every 100 hours of use.

Warning

The lamp unit should only be replaced by a qualified technician.

Lamp unit replacement period

The lamp is a consumable product. Even when the full life of the bulb has

#Turn off the MAIN POWER switch and disconnect the power cord plug from the wall outlet.

Turn off the MAIN POWER switch according to the procedure given in “Turning off the power” on page 26 before disconnecting the power cord plug from the wall outlet.

$Gently turn the projector upside down.

NOTE:

BPlace the projector on top of a soft cloth so that it will not become scratched.

%Remove the air filter.

Put your fingernails under the air filter and pull the air filter out of the projector.

&Clean the air filter.

Use a vacuum cleaner to clean off any accumulated dust.

'Install the air filter.

NOTE:

BBe sure to install the air filter before using the projector. If the projector is used without the air filter installed, dust and other foreign particles will be drawn into the projector, and malfunctions will result.

BIf the dust cannot be removed by cleaning, it is time to replace the air filter. Please consult your dealer. Furthermore, if the lamp unit is being replaced, replace the air filter at this time also.

When replacing the lamp, allow it to cool for at least one hour before handling it.

BThe lamp cover gets very hot, and touching it can cause burns.

Notes on replacing the lamp unit

BThe light generating lamp is made of glass, so dropping it or allowing it to hit hard objects may cause it to burst. Be careful when handling the lamp.

BDispose of the removed old lamp with the same care that would be taken with a fluorescent light.

BA Phillips screwdriver is necessary for removing the lamp unit.

NOTE:

BThe projector is not supplied with a replacement lamp unit. Please ask your dealer for details. Lamp unit product no.: ET-LAE700

CAUTION:

BDo not use any lamp unit other than the one with the product number indicated above.

not been exhausted, the brightness of the light will gradually decline. Therefore periodic replacement of the lamp is necessary.

The intended lamp replacement interval is 3 000 hours, but it is possible that the lamp may need to be replaced earlier due to variables such as a particular lamp’s characteristics, usage conditions and the installation environment.

Early preparation for lamp replacement is encouraged.

The lamp will automatically shut off after approximately 30 minutes when 3 000 hours of use have been reached because of a much greater chance of it exploding after this time.

NOTE:

BThe usage hours explained

above are for when “LAMP

POWER” in the “OPTION”

menu has been set to “HIGH”

and when “DYNAMIC IRIS” in

the “PICTURE” menu has

been set to “ON”. When

“LAMP POWER” has been set

to “HIGH” and “DYNAMIC

IRIS” has been set to “OFF”,

the usage hours will be 2 000

hours. If “LAMP POWER” is

set to “LOW”, the brightness of

the lamp will be less and life of

the lamp can be extended.

BWhile 3 000 hours is the

intended replacement interval,

it is not a period of time

Care and maintenance

Air filter

covered by warranty.

50-ENGLISH

ENGLISH-51

Page 25 Page 27
Image 26
Page 25 Page 27
Contents LCD Projector Model No. PT-AE700UDear Panasonic Customer Declaration of ConformityContents Precautions with regard to safetyDo not place the projector into water or let it become wet Do not handle the power cord plug with wet handsInsert the power cord plug securely into the wall outlet Do not place liquid containers on top of the projectorBefore use AccessoriesDo not put your weight on this projector Use only the specified batteriesLocation and function of each part Lamp unit cover Main Power switch pages 24 # Connector panel $ Air inlet portPower input socket AC $ Hdmi in connectorRemote control unit Projector control panelProjector position Setting-upProjection methods Projection distancesSetting up range using the lens shift function Started GettingConnections Connecting to video equipmentConnecting to equipment compatible with Hdmi Connecting to computer Operating rangeTurning on the power Power indicator Turning off the power#Press the Power button Projector statusPausing a picture Freeze Setting the aspect ratio Aspect Edit Using Color ManagementProfile CursorPress the User Memory button Profile SaveLOG On-screen menus Menu screensReturning a setting to the factory default Menu operation guideAdjusting the picture Memory Load Signal ModeMemory Save TV-SYSTEMChanging the display language Adjusting the positionTurning off the picture momentarily Shutter Option settings Remedy Lamp indicator Temp indicatorLamp indicator Lamp unit replacement period This will reset the cumulative Lamp unit replacement procedureTurn off the power Press and hold the Enter button for approximately 3 secondsBefore calling for service Cleaning and maintenanceOptions SpecificationsRemote control unit List of compatible signals AppendixDimensions Projection dimensions calculation methodsTrademark acknowledgements

PT-AE700U specifications

The Panasonic PT-AE700U is a high-performance LCD projector that has garnered attention for its impressive combination of features, performance, and versatility. Designed primarily for home theater enthusiasts, this projector showcases advanced technology that enhances the viewing experience, making it a popular choice for both casual users and cinephiles.

One of the standout features of the PT-AE700U is its native resolution of 1280 x 720 pixels, which allows for a stunning high-definition output. This resolution is particularly well-suited for displaying a wide range of HD content, from movies and sports broadcasts to video games. Coupled with a brightness rating of 1,200 ANSI lumens, the projector delivers vivid and vibrant images, even in moderately lit rooms.

The PT-AE700U is equipped with Panasonic’s proprietary Dynamic Iris technology, which intelligently adjusts the brightness of the image in real-time. This feature allows for deeper black levels and enhanced contrast ratios, elevating the overall picture quality. Additionally, the projector boasts a contrast ratio of 10,000:1, providing rich detail in both shadowy and brightly lit scenes.

Another significant aspect of the PT-AE700U is its lens, featuring a 1.6x zoom capability along with lens shift options. This flexibility in installation allows users to position the projector conveniently without compromising the image quality. The lens shift feature enables the projection of images without distortion, further enhancing the viewing experience.

In terms of connectivity, the PT-AE700U is well-equipped with multiple input options, including HDMI, component video, and S-Video, making it compatible with a range of external devices such as Blu-ray players, gaming consoles, and streaming devices. This extensive range of inputs adds to the projector’s versatility, enabling it to serve as a central hub for home entertainment.

In addition to its impressive technical specifications, the Panasonic PT-AE700U is designed with user-friendly features such as an easy-to-navigate menu system and remote control functionality. These conveniences allow for seamless operation and adjustments while immersed in viewing.

Overall, the Panasonic PT-AE700U projector stands out as a reliable and feature-rich option for home cinema enthusiasts, delivering exceptional performance through its innovative technologies and thoughtful design characteristics.
Top Page Image Contents