Panasonic PT-D995U operating instructions Connector Panel

Page 13

Controls and Features (cont.)

Connector Panel

Y/C (S video) input terminal (Mini DIN 4 pin)

Connect this terminal to the S video output terminal of a video deck, etc.

VIDEO (composite video) input terminal (BNC)

Connect this terminal to the composite video output terminal of a video deck, etc.

Y, PB/B-Y, PR/R-Y input terminals (BNC)

These are input terminals for component (Y, B-Y, R-Y) signals and Hi-Vision base band (Y, PB, PR) signals. Devices with component signal output terminals for NTSC or Hi- Vision can be connected.

AUDIO L/R (Audio left/right) input terminals (pin jacks)

Of devices connected to the video input terminals, such as a video deck, etc., the audio output terminals of the device to de projected is connected to these terminals. The input audio signal is reproduced by the speakers of the projector. The signal is also output from the AUDIO OUT terminal of the projector.

*When the input signal is stereo signal, connection should be made to both L and R.

*Signals from a monaural device should be connected to only L. That way, the projector’s speakers and the AUDIO OUT terminal produce the same sound from both Land R.

To select the proper audio input for video input:

The video input terminals (AV IN input terminals) can be switched with the projector’s or remote control’s VIDEO button. However, since this projector has only a single audio input terminal, reconnect audio input in accordance with the AV device to be used.

AUDIO OUT (audio output) terminal (stereo mini jack)

Of input signals inputted to the projector, the audio signal of the device being projected is output. Volume should be adjusted using the VOL. (+/-) buttons on the remote control or VOLUME on the setting menu. When a cable is connected to this jack, no audio sound is produced from the projector’s speakers.

REMOTE terminal (mini jack)

Connect an infrared remote control extension unit, etc. to this jack.

* For details, consult your dealer.

RS-232C connector (D-sub 9 pin)

This is a RS-232C interface-specified connector. This projector can be controlled by a computer connected externally.

* For details, consult your dealer.

COMPUTER OUT (computer output) connector (D-sub 3-row 15 pin)

The computer input signal projected on the screen is output. A display unit can be used by connecting it to this connector.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Operating Instructions Dear Panasonic Customer Safety Precautions Safety Precautions Be sure to ask your dealer to install the unit Contents Remote control unit TNQE168 AAA/R03-size dry cell battery AccessoriesApprox .5 m 4.92 ft Front Side /Top Surface / Right Side Controls and FeaturesMain Power switch AC in power input terminalConnector panel Adjustable foot for horizontal angle adjustmentAir intake area filter Bottom SurfaceOpening for replacing the light-source lamp Fixing footControl Panel Setting button When a menu is shownVideo button Quick ALIGN. buttonConnector Panel Computer in computer input -1 connector D-sub 3- row 15 pin Input of external sync signals is automatically detectedComputer in computer input -2 terminals BNC Audio input terminal stereo mini jackRemote Control Unit Install the batteries Installing BatteriesPrecautions for using batteries Open the back coverPrecautions for Installation Installing the ProjectorProjection Distance and Screen Size Installing the ProjectorAccording to aspect ratio Projection screen size diagonal lengthFor 16 9 aspect ratio screens For 4 3 aspect ratio screensProjection DistanceEffective range and distance of the remote control unit Effective Range and Distance of the Remote Control UnitSignals that Can Be Input to the Projector Connecting to Various DevicesVideo signals Response to color systems Response to double density *1, high-vision signalsConnecting to Hi-Vision Devices Connecting to Video DevicesVideo devices Hi-Vision devicesConnecting to Devices which Control the Projector Connecting to Other DevicesDesktop type To Audio OUTConnection to an IBM PC or IBM-compatible computer Connecting to Computer DevicesRGB output devices Connection to Macintosh To use the projector Connecting the Power Cord SuppliedRemove the lens cap When Turning On the Devices Connected to the Projector Basic Operations Turning on the PowerWhen you press Computer When you press VideoTo reduce the screen size Button To focus on nearer pointsWhen using the projector When using the remote control unitProjector’s button To turn off video image and audio sound temporarilyPress the projector’s Setting button To display the Setting menuPress the remote control’s MENU/ENTER button To use the remote control’s Preset buttonMaking Basic Settings Operating the Setting MenuPress the Setting button of the projector Press the Setting button to select the desired itemPixel Clock Tracking Operating the Main MenuSource Decoder Language Configuration of the Main Menu Computer-related inputOperating the Main Menu Basic Operation of the Main Menu Remote control unitMain menu Press the MENU/ENTER button Changing the Color SystemSelect Decoder with the cursor button or Set the color system with the cursor button orSelect Language with the cursor button or Changing the Language DisplaySet the desired language with Cursor Button FRANÇAlSAdjust Tracking and Phase with the cursor buttons Adjusting the Pixel ClockSelect Pixel Clock with the cursor Button or Adjust H. POS. and V. POS. with the cursor buttons Adjusting the Screen PositionSelect Position with the cursor button or Submenu items of the Position menu appear on the screenSelect the item to adjust with the cursor button or Adjusting Picture QualityWhen AV signals are input When computer-related signals are inputSubmenu items Make Adjustment with the cursor ButtonFor video system input For computer system inputBrightness Contrast Gain Text Mode Adjust Treble and Bass with the cursor buttons Adjusting Sound QualitySelect the Sound with the cursor button or Select the item to set adjust with the cursor button or Setting and Adjusting Other Functions OptionsFollowing optional functions can be set adjusted Select the Options with the cursorAdjustment item To adjust multiple items, repeat steps 4ButtonAdjustment content Options menuTemperature Adjustment contentColor temperature increases 1 6Select a submenu item Source using the cursor button or Changing Setting the SourceSelect the item to set using the cursor Buttons or When other than Auto is selected When Auto is selectedSubmenu item Press the MENU/ENTER button to set fix itLoosen the two screws with a flat-end screwdriver Replacing the Light-Source LampBe careful not to damage the claw Insert the new lamp unit fully inside and fasten the screws Turn on the Main Power switch to go into stand-by mode Resetting the Lamp Use TimeMain Power switch Control panel Stand by and Operate indicators come on at Same timeTurn off the Main Power switch Cleaning and Replacing the FilterClean the filter Reinstall the filterSymptom Probable cause TroubleshootingCorrective action Video image dims Color is poor or unstableStains on the cabinet MaintenanceStains on the lens AV in AV input SpecificationsComputer in Computer input Other Computer OUT Computer outputTop Outside dimensionsFront Unit inch mm Protrusion excludedRS-232C connector Pin assignment Specifications for connectors/terminalComputer IN-1 PC / Computer OUT connector TerminalExecutive Office Panasonic Broadcast & Television Systems CompanyPanasonic Canada Inc LCT0294-001B
Top Page Image Contents