Panasonic PT-D995U operating instructions Changing Setting the Source

Page 48

Operating the Main Menu (Cont.)

Changing (Setting) the Source

Remote control unit

MENU/ENTER button

Normally, use the source setting in AUTO. If use in AUTO is unstable such as color not appearing, the screen image is disturbed or intermitted, then set to the dedicated source (forced mode) in accordance with the input signal.

When shipped from the factory, the source settings are as follows:

Input mode	Factory setting	Input mode	Factory setting
VIDEO	NTSC	COMPUTER 1	AUTO
Y/C	NTSC	COMPUTER 2	AUTO
Y, PB/B-Y, PR/R-Y	AUTO

Depending on the signal from a device connected, adjustment may be needed after a dedicated source is set. If that is the case, adjust the appropriate items.

When the input mode (SOURCE) is VIDEO or Y/C, and if AUTO is set, the automatic detecting function may work, possibly causing the screen to be intermitted or disturbed. In that case, set to a dedicated source (forced mode).

Cursor buttonsWhen special effect playback (fast-forward/ twice-speed/triple-speed) is performed on a video deck, etc, the picture may be disturbed or intermitted,

depending on the device.

PAGE BACK button

Main menu

Submenu item [SOURCE]

The selected item is shown in magenta color. Items shown in gray color cannot be operated or set in the current mode. Items that can be set are different when video signals are input and when computer signals are input.

For dedicated source signals (corresponding frequency, etc.) for computer signals, see page 21.

Press the MENU/ENTER button.

The main menu appears on the screen.

Select a submenu item “SOURCE” using the cursor button or .

The SOURCE item (shown in text) is indicated in magenta color.

Press the MENU/ENTER button.

The submenu items, SOURCE menu, appears on the screen.

The display in ( ) shows the currently set status.

(SOURCE menu)

Select the item to set using the cursor

buttons or .

The item to set is shown in magenta color.

(To be continued on the next page)

48

Image 48

Contents Operating Instructions Dear Panasonic Customer Safety Precautions Safety Precautions Be sure to ask your dealer to install the unit Contents Accessories Remote control unit TNQE168 AAA/R03-size dry cell batteryApprox .5 m 4.92 ft Controls and Features Front Side /Top Surface / Right SideAC in power input terminal Main Power switchConnector panel Adjustable foot for horizontal angle adjustmentBottom Surface Air intake area filterOpening for replacing the light-source lamp Fixing footControl Panel When a menu is shown Setting buttonVideo button Quick ALIGN. buttonConnector Panel Input of external sync signals is automatically detected Computer in computer input -1 connector D-sub 3- row 15 pinComputer in computer input -2 terminals BNC Audio input terminal stereo mini jackRemote Control Unit Installing Batteries Install the batteriesPrecautions for using batteries Open the back coverInstalling the Projector Precautions for InstallationInstalling the Projector Projection Distance and Screen SizeAccording to aspect ratio Projection screen size diagonal lengthFor 4 3 aspect ratio screens For 16 9 aspect ratio screensProjection DistanceEffective Range and Distance of the Remote Control Unit Effective range and distance of the remote control unitConnecting to Various Devices Signals that Can Be Input to the ProjectorVideo signals Response to color systems Response to double density *1, high-vision signalsConnecting to Video Devices Connecting to Hi-Vision DevicesVideo devices Hi-Vision devicesConnecting to Other Devices Connecting to Devices which Control the ProjectorDesktop type To Audio OUTConnecting to Computer Devices Connection to an IBM PC or IBM-compatible computerRGB output devices Connection to Macintosh Connecting the Power Cord Supplied To use the projectorRemove the lens cap When Turning On the Devices Connected to the Projector Turning on the Power Basic OperationsWhen you press Video When you press ComputerTo reduce the screen size To focus on nearer points ButtonWhen using the remote control unit When using the projectorProjector’s button To turn off video image and audio sound temporarilyTo display the Setting menu Press the projector’s Setting buttonPress the remote control’s MENU/ENTER button To use the remote control’s Preset buttonOperating the Setting Menu Making Basic SettingsPress the Setting button of the projector Press the Setting button to select the desired itemOperating the Main Menu Pixel Clock TrackingConfiguration of the Main Menu Computer-related input Source Decoder LanguageRemote control unit Operating the Main Menu Basic Operation of the Main MenuMain menu Changing the Color System Press the MENU/ENTER buttonSelect Decoder with the cursor button or Set the color system with the cursor button orChanging the Language Display Select Language with the cursor button orSet the desired language with Cursor Button FRANÇAlSAdjusting the Pixel Clock Adjust Tracking and Phase with the cursor buttonsSelect Pixel Clock with the cursor Button or Adjusting the Screen Position Adjust H. POS. and V. POS. with the cursor buttonsSelect Position with the cursor button or Submenu items of the Position menu appear on the screenAdjusting Picture Quality Select the item to adjust with the cursor button orWhen AV signals are input When computer-related signals are inputMake Adjustment with the cursor Button Submenu itemsFor video system input For computer system inputBrightness Contrast Gain Text Mode Adjusting Sound Quality Adjust Treble and Bass with the cursor buttonsSelect the Sound with the cursor button or Setting and Adjusting Other Functions Options Select the item to set adjust with the cursor button orFollowing optional functions can be set adjusted Select the Options with the cursorTo adjust multiple items, repeat steps 4 Adjustment itemButtonAdjustment content Options menuAdjustment content TemperatureColor temperature increases 1 6Changing Setting the Source Select a submenu item Source using the cursor button orSelect the item to set using the cursor Buttons or When Auto is selected When other than Auto is selectedSubmenu item Press the MENU/ENTER button to set fix itReplacing the Light-Source Lamp Loosen the two screws with a flat-end screwdriverBe careful not to damage the claw Insert the new lamp unit fully inside and fasten the screws Resetting the Lamp Use Time Turn on the Main Power switch to go into stand-by modeMain Power switch Control panel Stand by and Operate indicators come on at Same timeCleaning and Replacing the Filter Turn off the Main Power switchClean the filter Reinstall the filterTroubleshooting Symptom Probable causeCorrective action Video image dims Color is poor or unstableMaintenance Stains on the cabinetStains on the lens Specifications AV in AV inputComputer in Computer input Computer OUT Computer output OtherOutside dimensions TopFront Unit inch mm Protrusion excludedPin assignment Specifications for connectors/terminal RS-232C connectorComputer IN-1 PC / Computer OUT connector TerminalPanasonic Broadcast & Television Systems Company Executive OfficePanasonic Canada Inc LCT0294-001B