Panasonic PT-D995U operating instructions Changing the Color System, Press the MENU/ENTER button

Page 37

: Forward /

AUTO

NTSC

NTSC4.43

PAL

SECAM

Operating the Main Menu (Cont.)

Changing the Color System

Remote control unit

MENU/ENTER

button

Cursor buttons

PAGE BACK button

Main menu

AUTO is set for the color system when the projector is shipped from the factory. Normally, use it in AUTO. If operation in AUTO is unstable such as with color not being shown, set to a dedicated color system in accordance with the color system of the signal being input.

Press the MENU/ENTER button.

The main menu is shown on the screen.

Select “DECODER” with the cursor button or •

The selected item (displayed in text) is shown in magenta color on the screen.

Set the color system with the cursor button or •

Each time you press the cursor button or , the color system changes as follows.

: Backward

Normally, set to AUTO. The color system of a signal being input is automatically identified.

Dedicated to NTSC.

Dedicated to NTSC4.43.

Dedicated to PAL.

Dedicated to SECAM.

Color system (DECODER) display

When computer-related signal is input, the display of the color system is changed to gray color, making operation impossible. When video signals from AV devices are input, the item for the color system can be set.

About automatic signal identification

AUTO is selected when shipped from the factory. In AUTO, the color system (DECODER) of the signal being input is automatically identified and indicated in ( ). Refer to the main menu display.

If operation in AUTO is unstable such as with color not being shown, set to a dedicated color system in accordance with the color system of the signal being input. When the dedicated color system is set, be careful as automatic identification does not work.

To finish the main menu, press the PAGE BACK button.

37

Image 37

Contents Operating Instructions Dear Panasonic Customer Safety Precautions Safety Precautions Be sure to ask your dealer to install the unit Contents Remote control unit TNQE168 AAA/R03-size dry cell battery AccessoriesApprox .5 m 4.92 ft Front Side /Top Surface / Right Side Controls and FeaturesMain Power switch AC in power input terminalConnector panel Adjustable foot for horizontal angle adjustmentAir intake area filter Bottom SurfaceOpening for replacing the light-source lamp Fixing footControl Panel Setting button When a menu is shownVideo button Quick ALIGN. buttonConnector Panel Computer in computer input -1 connector D-sub 3- row 15 pin Input of external sync signals is automatically detectedComputer in computer input -2 terminals BNC Audio input terminal stereo mini jackRemote Control Unit Install the batteries Installing BatteriesPrecautions for using batteries Open the back coverPrecautions for Installation Installing the ProjectorProjection Distance and Screen Size Installing the ProjectorAccording to aspect ratio Projection screen size diagonal lengthFor 16 9 aspect ratio screens For 4 3 aspect ratio screensProjection DistanceEffective range and distance of the remote control unit Effective Range and Distance of the Remote Control UnitSignals that Can Be Input to the Projector Connecting to Various DevicesVideo signals Response to color systems Response to double density *1, high-vision signalsConnecting to Hi-Vision Devices Connecting to Video DevicesVideo devices Hi-Vision devicesConnecting to Devices which Control the Projector Connecting to Other DevicesDesktop type To Audio OUTConnection to an IBM PC or IBM-compatible computer Connecting to Computer DevicesRGB output devices Connection to Macintosh To use the projector Connecting the Power Cord SuppliedRemove the lens cap When Turning On the Devices Connected to the Projector Basic Operations Turning on the PowerWhen you press Computer When you press VideoTo reduce the screen size Button To focus on nearer pointsWhen using the projector When using the remote control unitProjector’s button To turn off video image and audio sound temporarilyPress the projector’s Setting button To display the Setting menuPress the remote control’s MENU/ENTER button To use the remote control’s Preset buttonMaking Basic Settings Operating the Setting MenuPress the Setting button of the projector Press the Setting button to select the desired itemPixel Clock Tracking Operating the Main MenuSource Decoder Language Configuration of the Main Menu Computer-related inputOperating the Main Menu Basic Operation of the Main Menu Remote control unitMain menu Press the MENU/ENTER button Changing the Color SystemSelect Decoder with the cursor button or Set the color system with the cursor button orSelect Language with the cursor button or Changing the Language DisplaySet the desired language with Cursor Button FRANÇAlSAdjust Tracking and Phase with the cursor buttons Adjusting the Pixel ClockSelect Pixel Clock with the cursor Button or Adjust H. POS. and V. POS. with the cursor buttons Adjusting the Screen PositionSelect Position with the cursor button or Submenu items of the Position menu appear on the screenSelect the item to adjust with the cursor button or Adjusting Picture QualityWhen AV signals are input When computer-related signals are inputSubmenu items Make Adjustment with the cursor ButtonFor video system input For computer system inputBrightness Contrast Gain Text Mode Adjust Treble and Bass with the cursor buttons Adjusting Sound QualitySelect the Sound with the cursor button or Select the item to set adjust with the cursor button or Setting and Adjusting Other Functions OptionsFollowing optional functions can be set adjusted Select the Options with the cursorAdjustment item To adjust multiple items, repeat steps 4ButtonAdjustment content Options menuTemperature Adjustment contentColor temperature increases 1 6Select a submenu item Source using the cursor button or Changing Setting the SourceSelect the item to set using the cursor Buttons or When other than Auto is selected When Auto is selectedSubmenu item Press the MENU/ENTER button to set fix itLoosen the two screws with a flat-end screwdriver Replacing the Light-Source LampBe careful not to damage the claw Insert the new lamp unit fully inside and fasten the screws Turn on the Main Power switch to go into stand-by mode Resetting the Lamp Use TimeMain Power switch Control panel Stand by and Operate indicators come on at Same timeTurn off the Main Power switch Cleaning and Replacing the FilterClean the filter Reinstall the filterSymptom Probable cause TroubleshootingCorrective action Video image dims Color is poor or unstableStains on the cabinet MaintenanceStains on the lens AV in AV input SpecificationsComputer in Computer input Other Computer OUT Computer outputTop Outside dimensionsFront Unit inch mm Protrusion excludedRS-232C connector Pin assignment Specifications for connectors/terminalComputer IN-1 PC / Computer OUT connector TerminalExecutive Office Panasonic Broadcast & Television Systems CompanyPanasonic Canada Inc LCT0294-001B