Panasonic PT-LB80NTU manual Projecting an image, Selecting the input signal, Positioning the image

Page 22

Projecting an image

Selecting the input signal

1. Switch on the connected devices.

Press the play button of the required device.

2.Detect the input signal automatically.

3.Switch the aspect ratio automatically.

NOTE:

•If the SIGNAL SEARCH in OPTION menu is deactivated, select the required input method by pressing the INPUT SELECT buttons of the remote control or the INPUT SELECT button of the projector several times. See “SIGNAL SEARCH” on page 35, “Switching the input signal” on page 24 or “INPUT SELECT button” on page 12.

•See “ASPECT” on page 32.

Basic Operation

Positioning the image

1.Place the projector at the right angle from the screen.

Screen

2. Adjust the vertical angle of the projector.

Press the front leg adjuster buttons and adjust the vertical angle.

See “Front leg adjusters and throwing angle” on page 16.

3. Open the Zoom-Focus ring cover.

See “Zoom-Focus ring cover” on page 12.

4.Turn the zoom and focus rings to adjust the projected image.

You can confirm the adjusted effect with the TEST PATTERN in OPTION menu. See “TEST PATTERN” on page 36.

Focus ring

Zoom ring

5. Close the Zoom-Focus ring cover.

See “Zoom-Focus ring cover” on page 12.

NOTE:

•Do not touch the air exhaust port as this may cause burns or injury.

•If keystone distortion occurs, see “KEYSTONE” on page 32.

•When you adjust the zoom after adjusting the focus, you may need to adjust the focus of the image again.

ENGLISH - 22

Image 22

Contents PT-LB80U PT-LB75NTU PT-LB75U Important Safety Notice Important InformationTrade Name Important Safety NoticeDeclaration of Conformity PanasonicContents Contents SettingsMaintenance AppendixPrecautions with regard to safety Do not look into the lens while the projector is being used Precautions with regard to safetyDo not set up the projector outdoors Always disconnect all cables before moving the projectorUse only the specified batteries Remove the used batteries from the remote control promptlyDo not put your weight on this projector Do not mix old and new batteriesOptical components SecurityOrder to get the best picture quality Liquid crystal panelM 5’10 AccessoriesK1HA15DA0002 Read this first Minimum required setting screenPreparation Top and front view About Your ProjectorProjector body Control panelBack and bottom view About Your Projector Remote controlBattery compartment Top view Attaching a hand strapScreen size and throw distance Setting upCalculation methods for screen dimensions StartedProjection method Front leg adjusters and throwing angleSetting up Mounting in the ceiling and projecting from frontConnecting with Video IN/S-VIDEO Connecting example AV equipmentConnecting example Computers ConnectionsConnecting Switching the projector on/offPower cord Direct power off functionBy control panel operation By remote control operation Switching on the projectorSwitching the projector on/off By direct power on functionBy direct power off function Switching off the projectorBy remote control operation By control panel operationPower indicator status Power and Power Lock indicatorsPower Lock indicator status IndicatorProjecting an image Selecting the input signalPositioning the image Operating range Remote control operationSetting up the image position automatically Facing to the projectorRemote control operation Switching the input signalResetting to the factory default settings Capturing an imageControlling the volume of the speaker Projecting an image in INDEX-WINDOW modeUsing an assigned function OperationShifting the center point Enlarging the centered areaEnlarging the image Press any side of the Digital Zoom +/- button onceMenu Navigation Navigating through the MenuMenu Navigation Still ModeMain menu and Sub-menu TV-SYSTEMClosed Caption Setting Picture menu For S-VIDEO/VIDEO signals Detailed SetupFor RGB signals Position menu 169 Frame LockPosition menu S43Option menu Direct Power on Lamp PowerPower OFF Timer Auto SetupTest Pattern Closed Caption SettingFunction Button Option items ReferSecurity menu Password ChangeInput Password Text DisplayItems in Wireless menu Wireless menuWireless menu, the following items are available Lamp indicator Lamp and Temp IndicatorsManaging the indicated problems Temp indicatorCare and Replacement Cleaning the projectorReplacing the Lamp unit Care and ReplacementWhen to replace the Lamp unit Before replacing the lamp unitResetting the Lamp Runtime Care and Replacement Replacement procedureRemoving and replacing the lamp unit Troubleshooting Quality*2 List of compatible signalsTechnical Information Dots*1 KHz MHzSerial terminal Computer connection guidance Technical Information Cable specificationsControl commands ProjectorPT-LB80NTU Screen size and throw distance for 169 aspect ratioPT-LB75NTU Specifications Audio VideoComputer Computer AudioTrademark acknowledgements DimensionsUnit mm Index Power IndexInformation Importante Avis important concernant la sécuritéNuméro de série Déclaration de conformité Avis important concernant la sécuritéAvertissement Modèle nPrécautions de sécurité AvertissementsNe pas obstruer les orifices dentrée et de sortie dair Mises EN GardePrécautions de sécurité Ne pas utiliser le projecteur à lair libreSinon cela peut causer des chocs électriques Retirer les piles usées de la télécommande au plus vitePrécautions lors du transport Utiliser uniquement les piles spécifiéesSécurité Précautions lors de linstallationPrécautions lors de lutilisation Affichage à cristaux liquidesDélai de remplacement de lUnité de la lampe Remplacement de lunité de la lampeAvant de remplacer le lunité de la lampe Retirer et remplacer la lampe Réinitialisation de Durée DE LA Lampe