Panasonic PT-F200E, PT-F200NTE manual Switching on the projector, Switching off the projector

Page 23

Switching the projector on/off

Switching on the projector

1.

Switch the MAIN POWER on.

3. Press the POWER button.

 

The power indicator lights up in RED.

The power indicator lights up in GREEN after

2.

Open the Front panel cover.

flashing for a while.

 

This is not necessary in Remote control operation.

The STARTUP LOGO is displayed on the screen.

 

 

See “STARTUP LOGO” on page 36.

NOTE:

When starting up the projector, some small rattling or tinkling sound may be heard, or the display may flicker for the characteristics of the lamp. Those are normal and will not affect the performance of the projector.

When the internal cooling fan is operating, some, operational sound may be heard. The loudness of the operational sound depends on the external temperature.

If you disconnected the Mains lead or switched off the MAIN POWER while on projecting mode, the projection will start with connecting the Mains lead or switching on the MAIN POWER. See “DIRECT POWER ON” on page 37.

Switching off the projector

Basic Operation

1.Open the Front panel cover.

This is not necessary in Remote control operation.

2. Press the POWER button.

The confirmation screen is displayed. It will disappear and return to the projection after 10 seconds without any operation.

To return to the projection, press any button except the POWER button.

3. Press the POWER button.

The power indicator lights up in ORANGE while cooling the lamp, then illuminates RED when is ready to switch off the MAIN POWER.

4.Switch off the MAIN POWER on the back of the projector.

NOTE:

Press the POWER twice or for a long duration to switch the power off.

You can disconnect the Mains lead or switch off the MAIN POWER instead of following this procedure. See “DIRECT POWER ON” on page 37.

You can turn off the projector by pressing the POWER button longer than 0.5 seconds.

ENGLISH - 23

Image 23
Contents PT-F200E To rain or moisture Important Safety NoticeModel number PT-F200NTE / PT-F200E This Apparatus Must be EarthedFor business users in the European Union Important Safety NoticeDeclaration of Conformity Important Safety InformationImportant Infomation Contents Appendix SettingsMaintenance ContentsPrecautions with regard to safety Use only the specified batteries Precautions with regard to safetyDo not set up the projector outdoors Do not look into the lens while the projector is being usedElectric shocks can result if this is not done Remove the used batteries from the remote control promptlyDo not put your weight on this projector Do not mix old and new batteriesSecurity AccessoriesRead this first Minimum required setting screenAbout Your Projector Remote controlControl panel Projector bodyAbout Your Projector Top and front viewOutput by menu operation About Your Projector Back and bottom viewComputer. Selectable for input Projected image Setting upCalculation methods for screen dimensions Screen size and throw distanceMounting in the ceiling and projecting from front Front leg adjusters and throwing angleSetting up Projection methodVertical shift Adjusting the Lens shift leverLens shift and positioning Horizontal shiftWhen the projector position is fixed Setting up Projector location rangeWhen the screen position is fixed LAN terminal Connecting example ComputersConnections Before connection to the projectorConnections Connecting example AV equipmentsConnecting with Video IN/S-VIDEO Connecting with ComponentMains lead Switching the projector on/offPower indicator Switch the Main Power on Press the Power button Switching on the projectorSwitching off the projector Switching the projector on/offFocus lever Zoom lever Selecting the input signalProjecting an image Positioning the imageFacing to the projector Remote control operationSetting up the image position automatically Operating rangeUsing the laser pointer Switching the input signalStopping the projection temporary Resetting to the factory default settingsProjecting an image in INDEX-WINDOW mode Capturing an imageShifting the centre point Controlling the volume of the speakerEnlarging the centred area Enlarging the imageDisplaying the Main menu Adjusting with the bar scale itemsMenu Navigation Navigating through the MenuMenu Navigation Main menu and Sub-menuWEB Control Live Mode CUT Status InitializeNetwork Standby Picture menu For RGB signals Detailed SetupFor S-VIDEO/VIDEO signals Position menu Position menu When the Resizing is set to OFFResizing Frame LockOption menu Signal Search Power OFF TimerDirect Power on Auto SetupSemi transparent dark blue Test PatternSemi transparent black Solid blueText Display Input PasswordPassword Change Security menuNetwork menu, the following items are available Network menuItems in Network menu Temp indicator LAMP, Temp and Filter IndicatorsManaging the indicated problems Lamp indicatorReplacing the ARF Auto Rolling Filter Care and ReplacementCleaning the projector Before replacing the Lamp unit Care and Replacement Resetting the FilterWhen to replace the Lamp unit Replacing the Lamp unitRemoving and replacing the lamp unit Ceiling mount bracket safeguardsCare and Replacement Replacement procedure Installing the safety cableTroubleshooting Dots*1 KHz MHz List of compatible signalsTechnical Information Quality*2Serial terminal Projector Technical Information Cable specificationsControl commands Computer connection guidanceRemote terminal Lamp switchingSwitching input Signals Specifications Computer Audio COMPONENT1OUT AudioSW m = SD x SH m = SD x LW m = 0.0332 x SD LT m = 0.066 x SD Screen size and throw distance for 169 aspect ratioThese Operating Instructions are printed on recycled paper DimensionsTrademark acknowledgements Unit mmCalculation methods IndexALS Ambient Luminance Sensor ARF Auto Rolling FilterIndex S1207-1127B