Remote control operation
Operating range
You can operate the projector with the Remote control within the remote range 15 m (49'2"), approximately
± 30° vertically and horizontally.
Facing to the projector
Ensure the Remote control emitter is facing to the Remote control signal receptor on front/back of the projector and press the required buttons to operate.
Facing to the screen
Ensure the Remote control emitter is facing to the screen and press the required buttons to operate the projector. The signal will be reflected off the screen. The operating range may differ due to the screen material. This function may not be effective with a translucent screen.
NOTE:
• Do not let strong light shine onto the signal receptor. The Remote control may malfunction under strong light such as fluorescent.
• If there are any obstacles between the Remote control and the Remote control signal receptor, the Remote control may not operate correctly.
Setting up the image position automatically
Operation
You can adjust the setting of POSITION, DOT CLOCK and CLOCK PHASE in POSITION menu automatically for the projected COMPUTER signal image.
NOTE:
•If the dot clock frequency is 108 MHz or higher, AUTO SETUP is not effective.
•If the projected image is dark or blurred around the edge, AUTO SETUP may stop the processing before complete. Project a much clearer or lighter image and press the AUTO SETUP button again.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Screen |
|
|
|
| Projected image |
Basic