Direct power off function
You can disconnect the mains lead during projection or immediately after use and move the projector. The cooling fan will operate by the internal power supply to cool down the lamp.
BWhen this function is used, it may take more time for the lamp to turn back on again compared to when the lamp cools down with the mains lead connected.
BDo not put the projector in a bag while the POWER button on the projector is illuminated.
CAUTION
If not using the projector for an extended period of time, disconnect the mains plug from the mains socket.
BIf dust builds up on the mains plug, the resulting humidity may damage the insulation, which could result in fire.
BThis projector continues to draw approximately 4 W of power even when the power is turned off.
POWER button on the projector
POWER button status | Projector status | ||
Red | Illuminated | The projector is in standby mode and image projection | |
is possible by pressing the POWER button. | |||
|
| ||
|
|
| |
|
| The projector is preparing for projection after the | |
| Flashing | power has been turned on while the POWER button | |
Green | on the projector is illuminated red. (After a short | ||
| |||
|
| period, a picture will be projected.) | |
| Illuminated | A picture is being projected. | |
|
|
| |
|
| The lamp is cooling down after the power has been | |
| Illuminated | turned off or while direct power off function is | |
|
| operating. | |
Orange |
|
| |
| The projector is preparing for projection after the | ||
| Flashing | power has been turned on while the POWER button | |
| on the projector is illuminated orange. (After a short | ||
|
| ||
|
| period, a picture will be projected.) | |
Basic operation