Panasonic PT-LB50E, PT-LB50SE manual Selecting the input signal, Press the Input Select button

Selecting the input signal

(INPUT SELECT/ DIRECT INPUT SELECT)

You can select the input signal by pressing the INPUT SELECT button or the DIRECT INPUT SELECT buttons.

Projector control panel

Press the INPUT SELECT button.

BThe input signal selected will change as shown below each time the INPUT SELECT button is pressed.

INPUT SELECT		Changing signals
button
Control
panel	PC1�	PC2	S-VIDEO
Remote	WIRELESS	*	VIDEO
control
unit

* “WIRELESS” is for the PT-LB50NTE only.

Press the DIRECT INPUT SELECT buttons.

BYou can select the input signal directly.

DIRECT INPUT		Changing signals
SELECT buttons
		The signal that is being input to the
		PC 1 IN connector will be projected.
		The signal that is being input to the
Remote		PC 2 IN connector will be projected.
		The signal that is being input to the S-
control		VIDEO IN connector will be projected.
unit		The signal that is being input to the
		VIDEO IN connector will be projected.
	*	The signal that is set by the wireless
		network will be projected. (page 56)

* “WIRELESS” is for the PT-LB50NTE only.

NOTE:

B“PC2” cannot be selected when “PC2 SELECT” in the “OPTION” menu is set to “OUTPUT”.

30-ENGLISH