Panasonic PT-LB60NTE manual Contrast, Brightness, Tint, Sharpness, Color Temperature

The mode best used in dark rooms is “NATURAL”. For rooms having regular lighting conditions in use, select “STANDARD”. For exceptionally bright rooms, use “DYNAMIC”.

“BLACKBOARD” is available only when “BLACKBOARD” in the “OPTION” menu is set to “ON”. Select “BLACKBOARD” when projecting onto blackboards.

CONTRAST

This adjusts the contrast of the picture. (Adjust the “BRIGHTNESS” setting first if required before adjusting the “CONTRAST” setting.) The picture is bright: I button The picture is dark: H button

BRIGHTNESS

This adjusts the darker areas (black areas) in the picture.

Black areas are too light: I button

Dark areas are too solid: H button

COLOR

(S-VIDEO/VIDEO/YPBPRonly) The colour is too deep: I button The colour is too pale: H button

TINT

(NTSC/NTSC 4.43/YPBPR only) This adjusts the flesh tones in the picture.

The flesh tones are greenish:

Ibutton

The flesh tones are reddish:

Hbutton

SHARPNESS

To soften the picture details:

Ibutton

To sharpen the picture details:

Hbutton

COLOR TEMPERATURE

This is used to adjust the white areas of the picture if they appear bluish or reddish.

Normally “STANDARD” should be selected. If the white areas of the pictures appear reddish, set to “HIGH”. If the white areas of the pictures appear bluish, set to “LOW”.

Projecting sRGB- compatible pictures

sRGB is an international colour
reproduction standard (IEC61966-2-
	settings
If you would like the colours in
1) established by the International
Electrotechnical Commission (IEC).
sRGB-compatible pictures to be	and
reproduced more faithfully, make
	Adjustments
the following settings.
#Press the F or G button to
select “PICTURE MODE”, and
then press the I or H button
to select “NATURAL”.

$Press the DEFAULT button on the remote control unit.

%Press the F or G button to select “COLOR TEMPERATURE”, and then press the I or H button to select “STANDARD”.

ENGLISH-41