Panasonic PT-LB60NTE manual Always disconnect all cables before moving the projector

Page 8

Always disconnect all cables before moving the projector.

BMoving the projector with cables still attached can damage the cables, which could cause fire or electric shocks to occur.

Do not place any heavy objects on top of the projector.

BFailure to observe this may cause the projector to become unbalanced and fall, which could result in damage or injury.

Do not short-circuit, heat or disassemble the batteries or place them into water or fire.

BFailure to observe this may cause the batteries to overheat, leak, explode or catch fire, and burns or other injury may result.

When inserting the batteries, make sure the polarities (+ and -) are correct.

BIf the batteries are inserted incorrectly, they may explode or leak, and fire, injury or contamination of the battery compartment and surrounding area may result.

Use only the specified batteries.

BIf incorrect batteries are used, they may explode or leak, and fire, injury or contamination of the battery compartment and surrounding area may result.

Do not mix old and new batteries.

BIf the batteries are inserted incorrectly, they may explode or leak, and fire, injury or contamination of the battery compartment and surrounding area may result.

Do not put your weight on this projector.

BYou could fall or the projector could break, and injury may result.

BBe especially careful not to let young children stand or sit on the projector.

If not using the projector for an extended period of time, disconnect the mains plug from the mains socket.

BIf dust builds up on the mains plug, the resulting humidity may damage the insulation, which could result in fire.

BThis projector continues to draw approximately 3 W of power even when the power is turned off.

Disconnect the mains plug from the mains socket as a safety precaution before carrying out any cleaning.

BElectric shocks can result if this is not done.

If the lamp has broken, ventilate the room immediately. Do not touch or bring your face close to the broken pieces.

BFailure to observe this may cause the user to absorb the gas which was released when the lamp broke and which contains nearly the same amount of mercury as fluorescent lamps, and the broken pieces may cause injury.

BIf you believe that you have absorbed the gas or that the gas has got into your eyes or mouth, seek medical advice immediately.

BAsk your dealer to replace the lamp unit and check the inside of the projector.

8-ENGLISH

Image 8
Contents LCD Projector Commercial Use Model No. PT-LB60NTEPage Preparation For business users in the European UnionContents Do not remove the cover or modify it in any way Precautions with regard to safetyDo not overload the mains socket Do not handle the mains plug with wet hands Insert the mains plug securely into the mains socketDo not place the projector into water or let it become wet Do not place liquid containers on top of the projectorDo not look into the lens while the projector is being used Do not cover the air inlet port or the air outlet portDo not put your weight on this projector Always disconnect all cables before moving the projectorDo not place any heavy objects on top of the projector Use only the specified batteriesAccessories Before use Be sure to attach the lens cover before moving the projectorOrder to get the best picture quality Do not touch the surfaces of the lens with your bare handsScreen LampLocation and function of each part Leg adjuster buttons L/RLens cover Projection lens Remote control signal receptor # Connector panel $ Air outlet port $ %Projector control panel Menu Operation Remote control unit# PC Input indicator $ Lamp indicator Temp indicatorAuto Setup button pages 27 Illumination sensorDefault button Volume +/- buttons$ PC 1 in connector pages 21 Direct Input Select buttons pages 27PC 2 IN/PC 1 OUT connector pages 21, 22 Video in connector pages 23Variable Audio OUT connector pages 21, 22, + PC 1/2 Audio in connectors pages 21Setting-up Projection methodsProjector position Projection distances PT-LB60NTEConnecting to computer ConnectionsConnecting to video equipment Audio system Video deck Preparation for the remote control unit ENGLISH-25 Turning on the power $Press the Power buttonTurn on the power of all connected devices Before turning on the powerAdjusting the angle Adjusting the sizeAdjusting the focus Direct power on function$Pressagain. the Power button Turning off the power#Press the Power button Projector status Direct power off functionPower button on the projector Press the Direct Input Select buttons Selecting the input signalPress the Input Select button Correcting the image position automatically Auto Setup Adjusting the volume Volume Press the Volume +/- buttonTurning off the picture and sound momentarily Shutter Press the Shutter buttonPress the Digital Zoom +/- button Button functions when using Digital ZoomEnlarging the picture Digital Zoom Displaying two screens Index Window Press the Index Window buttonMoving the pointer Displaying the pointer PointerPress the Pointer button On-screen menus Menu screensMenu Screen Picture menu Position menuENGLISH-37 Press the Enter button Menu operation guide# Press the Menu button When an individual adjustment screen is being displayed Returning a setting to the factory defaultWhen a menu screen is being displayed Adjusting the picture Picture ModeColor Temperature ContrastBrightness ColorDetailed Setup Daylight ViewTV-SYSTEM Keystone Adjusting the positionRealtime Keystone Clock Phase AdjustmentsPosition DOT ClockS1 video signals AspectAuto S-VIDEO only 169Resizing Frame LockChanging the display language Startup Logo Option settingsInput Guide Lamp Power Pointer SelectPC2 Select Lamp RuntimePower OFF Timer Direct Power onAuto Setup Signal SearchInstallation VolumeHighland RGB/YPBPRIndex Window TYPE1 Transparent blackPassword Change Setting up the security functionInput Password Text Change SettingsText Display Wireless setup Lamp indicator Temp indicator RemedyLamp indicator Cleaning and replacing the air filter CleaningReplacement procedure Air filter should be cleaned every 100 hours of useLamp unit replacement period Replacing the lamp unitLamp unit replacement procedure HandlesEnglish Before calling for service Cleaning and maintenance Specifications PT-LB55NTERemote control unit OptionsProjection dimensions calculation methods AppendixList of compatible signals Mode ResolutionDisplay Scanning FrequencyManufacturer Keyboard Command Guide screen for computer connectionUsing the Serial connector Pin assignments and signal namesCommunications settings ConnectionCommand Control Contents Remarks Control commandsCable specifications Dimensions Trademark acknowledgements

PT-LB60NTE specifications

The Panasonic PT-LB60NTE is a versatile, high-performance LCD projector designed to meet the needs of modern classrooms, conference rooms, and any environment where effective and engaging presentations are required. With a bright 6,000 lumens output and a high contrast ratio of 10,000:1, this projector delivers clear, vivid images and detailed graphics, even in well-lit spaces.

One of the standout features of the PT-LB60NTE is its lightweight and compact design, making it easy to transport and set up in different locations. It weighs only 4.4 kg and can fit into most carrying cases, providing flexibility for traveling educators and business professionals. The projector's horizontal and vertical lens shift capabilities allow for easy installation and adjustment, ensuring that images can be perfectly aligned without distorting the picture quality.

This model is equipped with HDMI connectivity, making it compatible with modern media devices, laptops, and presentation tools. The dual HDMI ports allow for quick switching between multiple sources, enhancing the user experience during presentations. Additionally, the PT-LB60NTE offers a range of connectivity options, including VGA and USB inputs, enabling users to connect with various devices effortlessly.

The PT-LB60NTE also incorporates several advanced technologies for superior image quality. Its Dynamic Iris technology automatically adjusts the light output based on the content being projected, ensuring deeper blacks and enhanced color accuracy. The projector employs a long-lasting lamp with a lifespan of up to 7,000 hours in Eco Mode, reducing maintenance costs and downtime.

For educational settings, the PT-LB60NTE features a unique "Presentation Timer" function, which helps presenters manage their time effectively. Furthermore, it supports a range of image adjustments, including keystone correction and color management settings, allowing for optimal performance regardless of the environment.

Overall, the Panasonic PT-LB60NTE is an exceptional projector that combines portability, high brightness, and advanced technologies, making it an ideal choice for those seeking a reliable and high-quality presentation solution. Whether in educational institutions or corporate environments, this projector stands out with its impressive specifications and user-friendly features, meeting the demands of today’s dynamic presentation needs.