Panasonic PT-F100NTU manual Frame Lock, Position menu, S43, When the Resizing is set to OFF

POSITION menu

16:9	RESIZING
The squeezed signal will be projected in 16:9 ratio.
	When the input signal resolution is lower than the
	projector resolution, it will be projected at the projector
	resolution. You can deactivate the RESIZING and
	project the lower resolution input signal at its original
	resolution. Press I H to select the required setting.
	ON	Active
S4:3	OFF	Deactive

The input signal will be sized down 75 % and projected. S4:3 mode is effective when projecting 4:3 image on to a 16:9 screen.

AUTO

The S1 signal which contains an identifying signal will be detected and automatically project the image in proper ratio.

NOTE:

•If you project an image with an unmatched aspect ratio, the image may distort or some portions may be cropped. Select an aspect ratio which preserves the intention of the image creator.

•The order of ASPECT types is defined not only by the input method but also by the input signals. “List of compatible signals” on page 46

•If you project a copyrighted image enlarged or distorted by using ASPECT function in commercial use in a public place, such as a restaurant or hotel, you might infringe on the copyright of the creator which is protected by copyright law.

NOTE:

•Usually the recommended setting is ON.

•When the RESIZING is set to ON, the lower resolution input signal may be projected in less quality.

When the RESIZING is set to OFF;

•The size of the image will be projected smaller and you may need to adjust ZOOM and FOCUS, or the projector position backwards and forwards.

•DIGITAL ZOOM, KEYSTONE and INDEX-WINDOW are not available.

FRAME LOCK

If the projected image is degraded, you can activate FRAME LOCK for synchronisation. Press I H to select the required option.

OFF	Deactive
ON	Active

NOTE:

• This function is available with COMPUTER signals only.

Settings

ENGLISH - 35