Archos 501889 manual Touchscreen Calibration, Use

ENGLISH

TOUCHSCREEN CALIBRATION

When touchscreen functioning is impaired, you can recalibrate it.

-- If you can access the Android interface

1.In the device homescreen, touch Settings.

2.In the Settings screen, touch Repair & Formatting at the bottom of the menu list.

3.In the Repair & Formatting screen, touch Touchscreen Calibration. A message will tell you to put your ARCHOS down.

4.Put the device on a flat surface.

5.Touch Calibrate the touchscreen.

The calibration of the touchscreen starts. Do not touch the product until the calibration is finished. IMPORTANT: If you do not put the device on a flat surface (e.g. Table), the touchscreen calibration will not be successful.

--	If you do not have access to the Android interface
1.	When turning on the device, hold down		and press .
	The ARCHOS Recovery screen is displayed.
	Use	to switch between options and	to validate your selection.

2.Select Repair system and press .

3.In the Repair system screen, select Force touchscreen calibration and press .

4.Press again to confirm. And put your product on a flat surface.

The calibration of the touchscreen starts. Do not touch the product until the calibration is finished. IMPORTANT: If you do not put the device on a flat surface (e.g. Table), the touchscreen calibration will not be successful.

5.At the end of the calibration, press . The ARCHOS Recovery screen is displayed.

6.Select No. Your device will reboot.

8