Updating Management Information Base Files MIBs

Appendix A Upgrading Your CSS Software

Updating Management Information Base Files (MIBs)

8.Reboot the system. For example:

(config)# boot (config-boot)# reboot

The CSS automatically performs a flash upgrade, if necessary, and then boots the new image.

9.After you upgrade the software in a CSS 11506 that contains a passive SCM, use the passive sync command in boot-config mode (or the passive sync macro command) immediately after upgrading your CSS software to synchronize the boot configurations on the redundant SCMs. Refer to Chapter 1, Logging In and Getting Started, the “Configuring a Boot Configuration Record for the Passive SCM” section.

10.Use the restore command to restore the startup-config file, custom scripts, and user-profile files previously archived in the CSS archive directory. To see a list of files in the archive directory, enter:

#restore ?

•To restore the startup-config file, use the restore filename startup-configcommand. For example, to restore the startup-config file in the archive directory as the startup-config file on the CSS, enter:

#restore startup-config startup-config

•To restore each custom script and user profile file to the script directory, use the restore filename script command. For example, to restore the admin-profile filename to the CSS script directory, enter:

#restore admin-profile script

Updating Management Information Base Files (MIBs)

Cisco Systems recommends that you update the CSS MIBs after you upgrade the CSS software. CSS MIBs are included in the CSS GZIP file. During the software upgrade, the MIBs are loaded into the CSS /mibs directory.

	Cisco Content Services Switch Adminisitration Guide
A-14	78-13885-03