2Wire 78-13885-03 appendix Interactively Using the Upgrade Script

Appendix A Upgrading Your CSS Software

Upgrading Your CSS

•To restore the startup-config file, use the restore filename startup-configcommand. For example, to restore the startup-config file in the archive directory as the startup-config file on the CSS, enter:

#restore startup-config startup-config

•To restore each custom script and user profile file to the script directory, use the restore filename script command. For example, to restore the admin-profile filename to the CSS script directory, enter:

#restore admin-profile script

Interactively Using the Upgrade Script

The upgrade script allows you to enter information and make selections by responding to prompts as it runs. Before the script performs the upgrade, it prompts you to:

•Remove ADIs from the CSS if the script detects two installed versions on a hard disk-based system or on a flash disk-based system

•Enter the version of the new ADI

•Set the primary boot-file to the new ADI

•Reboot the CSS with the ADI you are installing after the upgrade is done

•Archive the running configuration to the startup configuration

To use the interactive version of the script:

1.Log into the CSS.

2.Archive your custom scripts and user-profile files from the CSS scripts directory to the archive directory. The upgrade overwrites files in the script directory but does not overwrite files in the archive directory. After the upgrade, you will restore these files to the scripts directory.

To archive each file to the archive directory, use the archive script command. The syntax for this command is:

archive script script_filename {archive_filename}

	Cisco Content Services Switch Adminisitration Guide
78-13885-03		A-7