Zebra Technologies P420i user manual Card Thickness Control Lever, Card Output Hopper

Page 18

Card

Printer

Solutions

General information

Getting started

Operation

Printing a card

Cleaning

Troubleshooting

Specifications

Appendix A

Appendix B

Appendix C

P420i Plastic Card Printer

C- CARD THICKNESS CONTROL LEVER

This item is operated by the user to prevent more than one card feeding into the printer at the same time and causing a jam.

Open Cover, and adjust lever to correct position.

Repeat for different card thickness.

(Factory setting is for 30mil (0.762mm) card thickness). See diagram below:

Card Thickness:

A - 60mil (1.524mm) to 50mil (1.27mm)

B - 40mil (1.016mm)

C - 30mil (0.762mm)

D - 20mil (0.508mm)

E* - Less than 20 mil (0.508mm)

* Start at lowest position and move lever up to match card thickness.

For other card thickness, start lever at lowest position and move up until cards feed.

D- CARD OUTPUT HOPPER

This item is used for collecting printed cards.

Install Card Output Hopper onto printer by hooking over bottom edge of card exit aperture.

Image 18
Contents Welcome to your new Foreword Product Warranty Statement Declarations of Conformity P420i Printer Models P420i Plastic Card Printer Table of contents Appendix a Magnetic Card Stripe Encoder Getting Started Unpacking your card printerPrinter Driver Disk floppy or/and CD Centronic Parrallel Indicators and Control DisplayPrinter Installation Printer Features OperationLoading Ribbons General information Loading Cards Card FeederInstall Card Cleaning Cartridge Card Thickness Control Lever Card Output HopperRejected Card Box Reject BOXP420i Plastic Card Printer Feeding one card at a time Printing a Test Card Printer Menu Information Next SelectReady Condt Printing a Sample Card NtingP420i Plastic Card Printer Set Printer Driver Options Printing a sample card Cleaning Protect Your Factory WarrantyCleaning System CleanPrinter Cleaning the Print Head Card Cleaning Cartridge Slot Troubleshooting Interpreting LCD Display messagesReject BOX Full P420i Plastic Card Printer Print Quality Issues SolutionPrinting shows very pale or inconsistent results No printing on the card Technical SPECIFICATI0NSCard Dimensions Interfaces Environmental Appendix a Magnetic Card Stripe EncoderIntroduction ·MEDIA Loading Orientation Down·MAGNETIC Encoder Cleaning ISO Standard EncodingAppendix B Smart Card Contact StationSmart Card Pins Contact Points ·SMART Card Contact Station InterfaceAccessories & supplies Appendix CRibbons Cards Blank White Cards Sold by the boxAccessories Printer SuppliesWorld Wide Sales and Support