1. S art Windows.
The A100 printerDialoguses cust m driver for the Windows operating system that allows your W nd ws applications to print to it.
2. Insert the Zebra A100 Printer Driver diskette in your floppy disk drive (A: or B:).
3. In Program Manager, click on the File menu. Select Run. (Windows 95 users: select Run from the Start menu)
4. Type A:\SETUP ( r B:\SETUP) and then press OK.
5. Follow the
After you have installed the Zebra A100 printer driver, we recommend that you use the Windows Printers Control Panel to configure it before you try to print. From the Main Program Group in Windows 3.1, select Control Panel, then Printers, then Zebra A100, then Setup. (Windows 95 users select Start, then Settings, then Printers, then Zebra A100 then File Properties, then Details, then Setup.) You will then see the Zebra A100’s Setup Dialog:
If you will use die cut labels or notched tickets or tags, then the
If you plan to tear off labels, tickets, tags, or strips as they are printed, then the Tear Mode is already selected for you. If instead you are using die cut pressure sensitive labels and want the printer to peel them from the backing and wait for you to take them, then click the Peel button. (See “Peel Off Mode Operation” for instructions on proper loading of peel off media.)
Enter the length of your label, tag, or ticket into the Label Length box by overtyping or using the up and down arrows. If you are using continuous media, enter the length you want your label, ticket, or tag to be.
Before printing, the Zebra A100 printer will normally reverse feed slightly to begin printing at the very top of the next label. If you wish to disable this feature to save time, click the No Backfeed button.
The Image Control slider sets the darkness of the printed image. The 100% setting is correct for most thermal media. We suggest you leave the slider set