Configuration Guide
Contivity Secure IP Services Gateway
Frame Relay on Contivity Secure IP Services Gateway
5.Define the DLCI number for this virtual circuit.
CES(config-subif)#dlci <integer>
<integer> is the DLCI number for this connection, from 16 – 991.
Example:
CES(config-subif)# dlci 100
6.Configure the traffic shaping parameters, CIR, committed burst, and excess burst.
<CIR> is the committed information rate assigned to the DLCI, in bits per second. <Committed_Burst> is the committed burst rate for this DLCI, in bits. <Excess_Burst> is the excess burst rate for this DLCI, in bits.
Example:
CES(config-subif)#traffic-shape 5000 4000 0
7.Configure the local IP address of this interface.
CES(config-subif)#ip local <address> <mask>
<address> is the IP address for this interface. <mask> is the subnet mask for this interface.
Example:
CES(config-subif)#ip local 10.1.1.1 255.255.255.0
8.Configure the IP address of device on the remote end of this virtual circuit.
CES(config-subif)#ip remote <address>
<address> is the IP address of the device on the other end of the DLCI.
Example:
CES(config-subif)#ip remote 10.1.1.2
CG030601 | 2.00 | July 2003 | Page: 11 of 14 |