Gyration Full-Size Keyboard user manual Insert four AA batteries into the keyboard

Page 5

2.Insert four AA batteries into the keyboard.

3.Press and hold the Learn button on the receiver for two seconds, and then release it. The Status light will blink slowly, indicating the receiver is in “Learn Mode.”

4.Press and release the Teach button located on the back of the keyboard (see below). The Status light on the receiver will blink rapidly for four seconds, then begin to blink slowly.

Note: At this time, press the Teach button on any additional devices (such as a second keyboard, an Ultra Mouse, or a GyroRe- mote).

5.To exit Learn Mode, press the Learn button on the receiver for two seconds. Otherwise, Learn Mode will automatically time out after five minutes.

If more than one Gyration device is being installed on the same system, place the receiver into Learn Mode (step 3

2

Image 5
Contents Gyration Full-Size Keyboard Product Specifications Table of Contents Gyration Full-Size Keyboard Insert four AA batteries into the keyboard Determining Which Channel the Keyboard is Using Powering the Keyboard On and Off Changing the Channel the Keyboard is UsingKey Program Function Support Special Keyboard Media KeysKeyboard Usage Tips Page Status Light Learn ButtonKeyboard LEDs Installing 3 or More DevicesPage Symptom Reason Solution Keyboard Troubleshooting TipsRegulatory Information FCC Statement Canadian Radio Interference Regulations Declaration of ConformityContacting Gyration Trademark Information Warranty InformationDL00070-001 Rev a