above) and then press the Teach button on each device before exiting Learn Mode. However, do not press the Learn button on the receiver for each device to be added (see “Installing 3 or More Devices” on page 9).
When the receiver is put into Learn Mode, it erases its mem- ory of previously learned devices and looks for new devices. Therefore when adding a new device to a system, it is neces- sary to put the receiver into Learn Mode and then press the Teach button on all the devices that will be used on the sys- tem.
After the Teach/Learn sequence is performed, the receiver and device(s) will remain synchronized after powering down and/or changing channels. It is only necessary to perform the Teach/Learn sequence when setting a device up for the first time or when adding additional devices to the system.
Determining Which Channel the Keyboard is Using
The
1.Press and quickly release the Channel button on the back of the keyboard.
2.Count the number of times the green LED light on the front (or back) of the keyboard flashes. The number of flashes indicates the channel the keyboard is using.
Note: If the keyboard’s channel is changed when the computer is powered down or the receiver is not connected, the devices will become unsynchronized. When the system is running, click and release the Channel button as described above to confirm the channel. The keyboard broadcasts a message across all eight channels that informs the receiver what chan- nel it is currently operating on. The receiver then automati- cally restores synchronization.
3