Nortel Networks 555-7101-215 manual Preparing the modem, Required equipment

Page 39

May 2003

Installing the server and connecting the peripheral devices

Preparing the modem

Introduction

You require a modem to support remote dial-up access to the CallPilot server. The modem also enables Nortel Networks technical support to connect to your CallPilot server for troubleshooting purposes. Nortel Networks connects to your server only when you request technical assistance.

Required equipment

ÑTo install the modem, you need the following equipment:

an analog external modem that includes

an RJ-11 analog phone cord

a power adapter cord

One of the following modems may have been provided with your server:

ÑU.S. Robotics 33.6 Kbps modem (NTRH9016)

ÑU.S. Robotics 56 Kbps modem (NTRH9078)

a 25-pin male to 9-pin female shielded serial cable for your modem

Note: Ensure that you have the correct cable for your modem, as follows:

Ñ33.6 Kbps modem: A0601464

56 Kbps modem: A0841984

Ñan analog line jack

tweezers, or a screw driver small enough to use to adjust the DIP switches

Part 2: 702t Server Hardware Installation

39

Image 39
Contents CallPilot P0604536 CallPilot Page Publication history Publication history Contents Contents A p t e r 702t server descriptionServer features Server dimensionsIntroduction Front panel features 702t server descriptionStandard Refer to Slot assignments on page 14 for slot assignments Rear panel diagramSlot definition and slot numbering Slot assignmentsBRD01 Slot assignments 702t server with RAIDSlot assignments 702t server without RAID IRQ mapping table Slot 5 RAID/On-Board Scsi controllers Network connectivity Customer LAN optional Sample network setup MeridianTelephony LAN/Customer LAN 10/100BaseT or 100BaseT Sample network setup Succession CSELAN connectivity Switch connectivityNetwork requirements Remote access connectivitySupported peripheral devices Preinstallation requirements Installation checklist Installation overviewMay 2003Preinstallation requirements Conventions for warnings To unpack the equipment Unpacking the 702t serverWhat’s next? To remove the side panel Removing the side panelBottom May Inspecting the server interior Protective foamTo remove protective foam and inspect the server interior Then Preinstallation requirements Installing the server and connecting the peripheral devices To install the server Installing the serverRequired equipment Preparing the modemDIP Modem DIP switchesOFF To set the modem DIP switchesNvram Before you begin Connecting peripherals to the serverRear panel To connect the modem to the server To connect the mouse, keyboard, and monitor to the serverConnecting the server to the Elan Media Access Control addressTo connect the server to the Elan Feature key adapter dongle. See To connect the server to the Clan Connecting the server to the Clan optionalWhat’s next? Installing the Nortel Networks software feature key adapter Requirements To install the software feature key adapterConnecting the server to power CallPilot server To start the server To connect the server to powerBinder Installing the server and connecting the peripheral devices P e n d i x a EMC emission level protection for the 702t ServerFerrites secured to an external cable Index NIC May Index Index Page Product release Document release Standard Date May

555-7101-215 specifications

The Nortel Networks 555-7101-215 is a significant component in the realm of telecommunications, offering a range of features that enhance communication capabilities for both businesses and service providers. Known primarily as a line interface card (LIC), this device is designed to support various voice and data applications, thereby facilitating seamless connectivity.

One of the most notable features of the 555-7101-215 is its compatibility with Nortel's Communication Server (CS) platforms, particularly the Meridian series. This integration allows for improved scalability and flexibility, enabling organizations to expand their communication networks effortlessly as their needs evolve. The card is engineered to support multiple configurations, which can accommodate different types of trunks and extensions, making it suitable for diverse environments.

In terms of technology, the 555-7101-215 utilizes digital signal processing (DSP) capabilities, which enhance call quality and provide advanced features such as echo cancellation and voice quality monitoring. These technologies ensure that voice transmissions are clear and reliable, which is essential for businesses that depend on effective communication with clients and stakeholders.

Another characteristic of the 555-7101-215 is its support for Integrated Services Digital Network (ISDN) and various protocol standards. This support enables users to connect to different networks while maintaining high-quality service. Additionally, it ensures that the device can handle multiple calls simultaneously, which is a crucial aspect for organizations with high call volumes.

The card also features robust management capabilities, including remote monitoring and diagnostics. This allows for proactive maintenance and troubleshooting, thereby reducing downtime and enhancing overall system reliability. The compact design of the 555-7101-215 further contributes to its versatility, making it easy to install in various rack-mounted setups.

Moreover, the card supports various compression techniques, optimizing bandwidth usage without sacrificing audio quality. This is particularly beneficial for organizations that need to manage limited bandwidth effectively.

Overall, the Nortel Networks 555-7101-215 represents a critical advancement in telecommunications technology, combining versatility, reliability, and high-quality performance. Its features and capabilities make it a preferred choice for businesses looking to enhance their communication infrastructure while maintaining efficiency and effectiveness.