7
Chapter 4 Troubleshooting • Power
If the power indicator is not on after the power cord is plugged in, check the power outlet or power cord. If
you lose power after the switch has been operating for some time, check for loose power connections,
power losses or surges at the power outlet. Disconnect and reconnect the power. If the problem persists,
contact MiLAN Technical Support.
• Cabling
Verify that the cabling type is correct. Be sure all cable connectors are securely seated in the required
ports. Use standard unshielded twisted-pair (UTP), Category 3, 4, or 5 cables. Use only Category 5
when there is a Fast Ethernet connection. Make sure the distance between the MIL-S800 and the
workstation, is less than 100 meters.