Nortel Networks NN47220-101 Opening a Switch Using Snmp versions 1 or, Field Description

8Using the Nortel Application Switch Element Manager

Field	Description
Synchronize	If checked, the switch synchronizes the SLB, filter, and
VRRP Peers on	VRRP configuration on a peer switch on Apply. To take
Apply	effect, peers must be configured on the switches and the
	administrator password on the switches must be identical.
ASEM Server Notifications Fields
Enable	Enable or disable ASEM Server e-mail notifications.
From	The e-mail address used to send the notification.
To	The e-mail address that receives the notification.
	Note: This field supports only a single e-mail address. To
	send an e-mail notification to multiple addresses, create a
	mail list for those addresses.
Server	The e-mail server used to send the notification.
Port	The port used by the e-mail server to receive messages.
User	The user name used to log into the e-mail server.
Password	The password used to log into the e-mail server.

Opening a Switch

ASEM provides two options for opening a switch for configuration and management. A switch can either be opened using SNMP versions 1 or 2, or SNMP version 3. The following sections explain how to open a switch through either of these methods.

Opening a Switch Using SNMP versions 1 or 2

To open a switch using SNMP versions 1 or 2, follow this procedure:

Step Action

1From the menu, select Nortel ASEM > Open. The Open Device screen opens. This screen is illustrated in "Open Device screen" (page 9).

Nortel Application Switch Element Manager

Users Guide

NN47220-101 (320512-D) 01.01 Standard

5.0 28 January 2008

Copyright © 2008, Nortel Networks