Nortel Networks BMD00009 Web Browser Set Up, Starting the BBI, Enabling/Disabling BBI Access

Alteon OS BBI Quick Guide

Enabling/Disabling BBI Access

By default, BBI access is enabled. If you need to disable or re-enable access, use the following command from the GbE Switch Module command-line interface:

>>Main# /cfg/sys/access/http <disableenable (or just de)>

For more information on the accessing and configuring the switch through the command-line interface, see your Alteon OS Command Reference.

Web Browser Set Up

Most modern Web browsers work with frames and JavaScript by default, and require no addi- tional set up. However, you should check your Web browser’s features and configuration to make sure frames and JavaScript are enabled.

NOTE – JavaScript is not the same as Java. Please make sure that JavaScript is enabled in your Web browser.

Starting the BBI

When the switch and browser set up is done, follow these steps to launch the BBI:

1.Start your Web browser.

2.Enter the switch IP interface address in the Web browser’s URL field.

For example, consider an IP interface with a network IP address of 1.90.90.96 You could enter the following:

BMD00009, November 2007 Getting Started „ 11