Commands

The following general commands are available on the toolbar:

Apply	Pending configuration changes do not take effect until you click the Apply
	command. Once applied, all changes take effect on the switch immediately. If
	you do not save the changes, however, they will be lost the next time the
	switch is rebooted.
Save	Writes applied configuration changes to non-volatile flash memory on the
	switch.
Revert	Removes pending configuration changes made since the last Apply command.
	Use this command to remove pending configuration changes made since the
	last Apply command.
Diff	Show any pending configuration changes.
Dump	Generates a dump of critical state information in the switch.
Show Log	Opens a new Web-browser window for displaying the most recent switch log
	messages. Close the log browser when finished.
Help	Opens a new Web-browser window for displaying the basic online help infor-
	mation. Close the help browser when finished.
Logout	Log off the switch and exit the BBI.

18 Browser-Based Interface Basics

BMD00009, November 2007