ID Setup
1.Aim the front point of the mouse at the receiver.
2.IMPORTANT: FIRST, PRESS THE CONNECT BUTTON OF THE MOUSE; THEN PRESS THE CONNECT BUTTON OF THE RECEIVER (fig. 5). NEVER REVERSE THIS PROCEDURE.
3.When the connect button of the receiver is pressed, the LED inside the receiver willlight. As soon as the linkage is completed, the LED will go off.
4.The setup must be completed within one minute. If setup time exceeds one minute, repeat procedure.
7
1
2
3
4
5
6
section
10ea_F8E825veaUSB_man.indd 7 | 15/2/05 4:35:07 |