Toshiba 46SL417U, 42SL417U manual Setting up the Network, Wireless Setup, Assisted Setup

Chapter 8: Advanced features

Setting up the Network

You can select the Network Type.

1 > Settings > PREFERENCES > Network Setup > OK .

(Another: > Network > Network Setup > OK .)

2Press B or b to highlight Network Type.

3Press C or c to select Wired or Wireless.

4If you select Wired, see “Advanced Network Setup” (- p. 58).

If you select Wireless, see the next section.

Wireless Setup

Note:

•Continued AP (Access Point) connection is not guaranteed. Connection may be lost while watching TV.

There are 3 methods for wireless setup:

•Easy Setup (WPS)

If the AP supports WPS, this can be used.

–WPS is a standard designed to simplify the connection of wireless LAN equipment and the setup of network security features.

•Assisted Setup (setup using the AP's notification information)

Network Name, Authentication, and Encryption are decided based on information from the AP. You need to manually set the Security Key.

•Manual Setup (to input all settings)

Easy Setup using PBC (Push Button Configuration)

1 > Settings > PREFERENCES > Network Setup > OK .

2Press B or b to select Wireless Setup. Press OK .

3Press B or b to select Easy Setup. Press OK .

4Press C or c to select PBC.

5Press b to select Start Scan. Press OK .

6Following the onscreen instructions, push the appropriate button on your AP.

7When a screen reporting that the setup has succeeded appears, press OK .

To cancel searching for the AP:

Press while searching for the AP. A message will appear. Press C or c to select Yes. Press OK .

Easy Setup using a PIN (Personal Identification Number)

1 > Settings > PREFERENCES > Network Setup > OK .

2Press B or b to select Wireless Setup. Press OK .

3Press B or b to select Easy Setup. Press OK .

4Press C or c to select PIN.

5Press b to select Start Scan. Press OK .

6Scan screen appears. Enter the PIN displayed on this screen into your PC or AP.

7Press B or b to select the desired AP. Press OK .

Note: Check the MAC address on the label or in the manual of the AP and select an AP.

8When a screen reporting that the setup has succeeded appears, press OK .

To cancel searching for the AP:

Press while searching for the AP. A message will appear. Press C or c to select Yes. Press OK .

Assisted Setup

1 > Settings > PREFERENCES > Network Setup > OK .

2Press B or b to select Wireless Setup. Press OK .

3Press B or b to select Assisted Setup. Press OK .

4Press B or b to select the desired AP. Press OK .

Note: Check the MAC address on the label or in the manual of the AP and select an AP.

5Select Security Key. Press OK . The Software Keyboard appears.

6Input the Security Key using the Software Keyboard (- p. 59). To save your settings, press the BLUE button.

Note: The Security Key must adhere to these conditions:

-TKIP/AES: 8-63 ASCII or 64 Hex characters

-WEP: 5 or 13 ASCII or 10 or 26 Hex characters

7 Select Done. Press OK .

Note: Settings are not saved if is pressed before Done is selected.

56